lkml.org 
[lkml]   [2023]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 2/3] arm64: dts: ti: k3-j721e: Add ESM support
From
Hi Nishanth,

On 03/05/23 17:18, Nishanth Menon wrote:
> On 15:03-20230503, Neha Malcom Francis wrote:
>> Add address entry mapping ESM on J721E.
>>
>> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>> index b912143b6a11..52bcde601eb8 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
>
> Why is'nt esm node introduced here?
>

As it stands esm node is already in
arch/arm/dts/k3-j721e-r5-common-proc-board.dts in u-boot and since this
patch is motivated to keep the u-boot and kernel dts in sync, I haven't
added it here.

Although... I could add it here similar to j7200 and take action to move
to the same in u-boot... maybe that is better route.

>> @@ -131,6 +131,7 @@ cbass_main: bus@100000 {
>> #size-cells = <2>;
>> ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
>> <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
>> + <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
>> <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
>> <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
>> <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
>> --
>> 2.34.1
>>
>

--
Thanking You
Neha Malcom Francis

\
 
 \ /
  Last update: 2023-05-03 13:56    [W:0.235 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site