Messages in this thread | ![/](/images/icornerl.gif) | | Date | Wed, 24 May 2023 10:57:28 +0530 | Subject | Re: [PATCH V3 4/4] arm64: dts: qcom: ipq9574: Enable crypto nodes | From | Anusha Canchi <> |
| |
On 5/22/2023 2:23 PM, bhupesh.sharma@linaro.org wrote: > On 5/18/23 7:41 PM, Anusha Rao <quic_anusha@quicinc.com> wrote: >> Enable crypto support for ipq9574. >> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> --- >> Changes in V3: >> - No change. >> >> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++ >> 1 file changed, 20 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> index fea15f3cf910..6e52d35a6a15 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi >> @@ -123,6 +123,26 @@ >> clock-names = "core"; >> }; >> + cryptobam: dma-controller@704000 { >> + compatible = "qcom,bam-v1.7.0"; > > Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If > "qcom,bam-v1.7.4" please use the newer compatible format. Sure, will update.
Thanks, Anusha > > Thanks, > Bhupesh > >> + reg = <0x00704000 0x20000>; >> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; >> + #dma-cells = <1>; >> + qcom,ee = <1>; >> + qcom,controlled-remotely; >> + }; >> + >> + crypto: crypto@73a000 { >> + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", >> "qcom,qce"; >> + reg = <0x0073a000 0x6000>; >> + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, >> + <&gcc GCC_CRYPTO_AXI_CLK>, >> + <&gcc GCC_CRYPTO_CLK>; >> + clock-names = "iface", "bus", "core"; >> + dmas = <&cryptobam 2>, <&cryptobam 3>; >> + dma-names = "rx", "tx"; >> + }; >> + >> tlmm: pinctrl@1000000 { >> compatible = "qcom,ipq9574-tlmm"; >> reg = <0x01000000 0x300000>; >>
| ![\](/images/icornerr.gif) |