Messages in this thread | ![/](/images/icornerl.gif) | | From | Jia-wei Chang (張佳偉) <> | Subject | Re: [PATCH v2 4/4] cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623 | Date | Wed, 24 May 2023 08:43:31 +0000 |
| |
On Wed, 2023-05-24 at 09:28 +0200, AngeloGioacchino Del Regno wrote: > External email : Please do not click links or open attachments until > you have verified the sender or the content. > > > Il 23/05/23 19:37, Daniel Golle ha scritto: > > On Tue, May 23, 2023 at 04:56:47PM +0200, AngeloGioacchino Del > > Regno wrote: > > > Il 22/05/23 20:03, Daniel Golle ha scritto: > > > > Hi Jia-Wei, > > > > Hi AngeloGioacchino, > > > > > > > > On Fri, Mar 24, 2023 at 06:11:30PM +0800, jia-wei.chang wrote: > > > > > From: AngeloGioacchino Del Regno < > > > > > angelogioacchino.delregno@collabora.com> > > > > > > > > > > During the addition of SRAM voltage tracking for CCI scaling, > > > > > this > > > > > driver got some voltage limits set for the vtrack algorithm: > > > > > these > > > > > were moved to platform data first, then enforced in a later > > > > > commit > > > > > 6a17b3876bc8 ("cpufreq: mediatek: Refine > > > > > mtk_cpufreq_voltage_tracking()") > > > > > using these as max values for the regulator_set_voltage() > > > > > calls. > > > > > > > > > > In this case, the vsram/vproc constraints for MT7622 and > > > > > MT7623 > > > > > were supposed to be the same as MT2701 (and a number of other > > > > > SoCs), > > > > > but that turned out to be a mistake because the > > > > > aforementioned two > > > > > SoCs' maximum voltage for both VPROC and VPROC_SRAM is 1.36V. > > > > > > > > > > Fix that by adding new platform data for MT7622/7623 > > > > > declaring the > > > > > right {proc,sram}_max_volt parameter. > > > > > > > > > > Fixes: ead858bd128d ("cpufreq: mediatek: Move voltage limits > > > > > to platform data") > > > > > Fixes: 6a17b3876bc8 ("cpufreq: mediatek: Refine > > > > > mtk_cpufreq_voltage_tracking()") > > > > > Signed-off-by: AngeloGioacchino Del Regno < > > > > > angelogioacchino.delregno@collabora.com> > > > > > Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> > > > > > --- > > > > > drivers/cpufreq/mediatek-cpufreq.c | 13 +++++++++++-- > > > > > 1 file changed, 11 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/drivers/cpufreq/mediatek-cpufreq.c > > > > > b/drivers/cpufreq/mediatek-cpufreq.c > > > > > index 764e4fbdd536..9a39a7ccfae9 100644 > > > > > --- a/drivers/cpufreq/mediatek-cpufreq.c > > > > > +++ b/drivers/cpufreq/mediatek-cpufreq.c > > > > > @@ -693,6 +693,15 @@ static const struct > > > > > mtk_cpufreq_platform_data mt2701_platform_data = { > > > > > .ccifreq_supported = false, > > > > > }; > > > > > +static const struct mtk_cpufreq_platform_data > > > > > mt7622_platform_data = { > > > > > + .min_volt_shift = 100000, > > > > > + .max_volt_shift = 200000, > > > > > + .proc_max_volt = 1360000, > > > > > + .sram_min_volt = 0, > > > > > + .sram_max_volt = 1360000, > > > > > > > > This change breaks cpufreq (with ondemand scheduler) on my BPi > > > > R64 > > > > board (having MT7622AV SoC with MT6380N PMIC). > > > > ... > > > > [ 2.540091] cpufreq: __target_index: Failed to change cpu > > > > frequency: -22 > > > > [ 2.556985] cpu cpu0: cpu0: failed to scale up voltage! > > > > ... > > > > (repeating a lot, every time the highest operating point is > > > > selected > > > > by the cpufreq governor) > > > > > > > > The reason is that the MT6380N doesn't support 1360000uV on the > > > > supply > > > > outputs used for SRAM and processor. > > > > > > > > As for some reason cpufreq-mediatek tries to rise the SRAM > > > > supply > > > > voltage to the maximum for a short moment (probably a side- > > > > effect of > > > > the voltage tracking algorithm), this fails because the PMIC > > > > only > > > > supports up to 1350000uV. As the highest operating point is > > > > anyway > > > > using only 1310000uV the simple fix is setting 1350000uV as the > > > > maximum > > > > instead for both proc_max_volt and sram_max_volt. > > > > > > > > A similar situation applies also for BPi R2 (MT7623NI with > > > > MT6323L > > > > PMIC), here the maximum supported voltage of the PMIC which > > > > also only > > > > supports up to 1350000uV, and the SoC having its highest > > > > operating > > > > voltage defined at 1300000uV. > > > > > > > > If all agree with the simple fix I will post a patch for that. > > > > > > > > However, to me it feels fishy to begin with that the tracking > > > > algorithm > > > > tries to rise the voltage above the highest operating point > > > > defined in > > > > device tree, see here: > > > > > > > > 6a17b3876bc830 drivers/cpufreq/mediatek-cpufreq.c (Jia-Wei > > > > Chang 2022-05-05 19:52:20 +0800 100) new_vsram > > > > = clamp(new_vproc + soc_data->min_volt_shift, > > > > 6a17b3876bc830 drivers/cpufreq/mediatek-cpufreq.c (Jia-Wei > > > > Chang 2022-05-05 19:52:20 +0800 > > > > 101) soc_data->sram_min_volt, soc_data- > > > > >sram_max_volt); > > > > > > > > However, I did not investigate in depth the purpose of this > > > > initial rise and can impossibly test my modifications to the > > > > tracking algorithm on all supported SoCs. > > > > > > > > > > Thanks for actually reporting that, I don't think that there's > > > any > > > valid reason why the algorithm should set a voltage higher than > > > the > > > maximum votage specified in the fastest OPP. > > > > > > Anyway - the logic for the platform data of this driver is to > > > declare > > > the maximum voltage that SoC model X supports, regardless of the > > > actual > > > board-specific OPPs, so that part is right; to solve this issue, > > > I guess > > > that the only way is for this driver to parse the OPPs during > > > .probe() > > > and then always use in the algorithm > > > > > > vproc_max = max(proc_max_volt, opp_vproc_max); > > > vsram_max = max(sram_max_volt, vsram_vreg_max);
Hi Daniel, Angelo Sir,
Thanks for the issue report and suggestions.
Is it possible to modify the value of proc_max_volt and sram_max_volt to 1310000 in mt7622_platform_data as the highest voltage declared in mt7622.dtsi and then give it a try?
Sorry, I need someone help to check this on mt7622 since I don't have mt7622 platform..
Thanks.
> > > > You probably meant to write > > vproc_max = min(proc_max_volt, opp_vproc_max); > > vsram_max = min(sram_max_volt, vsram_vreg_max); > > > > right? > > > > Apparently, some of my braincells was apparently taking a break. :-) > > Yes, I was meaning min(), not max() :-) > > Cheers! > > > > > > > Jia-Wei, can you please handle this? > > > > > > Thanks, > > > Angelo > > > > > >
| ![\](/images/icornerr.gif) |