lkml.org 
[lkml]   [2023]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 09/23] cxl/pci: Early setup RCH dport component registers from RCRB
    Date
    From: Robert Richter <rrichter@amd.com>

    CXL RAS capabilities must be enabled and accessible as soon as the CXL
    endpoint is detected in the PCI hierarchy and bound to the cxl_pci
    driver. This needs to be independent of other modules such as cxl_port
    or cxl_mem.

    CXL RAS capabilities reside in the Component Registers. For an RCH
    this is determined by probing RCRB which is implemented very late once
    the CXL Memory Device is created.

    Change this by moving the RCRB probe to the cxl_pci driver. Do this by
    using a new introduced function cxl_pci_find_port() similar to
    cxl_mem_find_port() to determine the involved dport by the endpoint's
    PCI handle. Plug this into the existing cxl_pci_setup_regs() function
    to setup Component Registers. Probe the RCRB in case the Component
    Registers cannot be located through the CXL Register Locator
    capability.

    This unifies code and early sets up the Component Registers at the
    same time for both, VH and RCH mode. Only the cxl_pci driver is
    involved for this. This allows an early mapping of the CXL RAS
    capability registers.

    Signed-off-by: Robert Richter <rrichter@amd.com>
    Signed-off-by: Terry Bowman <terry.bowman@amd.com>
    ---
    drivers/cxl/core/port.c | 7 +++++++
    drivers/cxl/cxl.h | 2 ++
    drivers/cxl/mem.c | 12 ------------
    drivers/cxl/pci.c | 37 ++++++++++++++++++++++++++++++++++++-
    4 files changed, 45 insertions(+), 13 deletions(-)

    diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
    index 66f567480238..eff91f141fde 100644
    --- a/drivers/cxl/core/port.c
    +++ b/drivers/cxl/core/port.c
    @@ -1477,6 +1477,13 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)
    }
    EXPORT_SYMBOL_NS_GPL(devm_cxl_enumerate_ports, CXL);

    +struct cxl_port *cxl_pci_find_port(struct pci_dev *pdev,
    + struct cxl_dport **dport)
    +{
    + return find_cxl_port(pdev->dev.parent, dport);
    +}
    +EXPORT_SYMBOL_NS_GPL(cxl_pci_find_port, CXL);
    +
    struct cxl_port *cxl_mem_find_port(struct cxl_memdev *cxlmd,
    struct cxl_dport **dport)
    {
    diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
    index 1c6fe53e9dc7..e5ae5f4e6669 100644
    --- a/drivers/cxl/cxl.h
    +++ b/drivers/cxl/cxl.h
    @@ -670,6 +670,8 @@ struct cxl_port *find_cxl_root(struct cxl_port *port);
    int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd);
    void cxl_bus_rescan(void);
    void cxl_bus_drain(void);
    +struct cxl_port *cxl_pci_find_port(struct pci_dev *pdev,
    + struct cxl_dport **dport);
    struct cxl_port *cxl_mem_find_port(struct cxl_memdev *cxlmd,
    struct cxl_dport **dport);
    bool schedule_cxl_memdev_detach(struct cxl_memdev *cxlmd);
    diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
    index 7ecdaa7f9315..0643852444f3 100644
    --- a/drivers/cxl/mem.c
    +++ b/drivers/cxl/mem.c
    @@ -65,18 +65,6 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
    ep->next = down;
    }

    - /*
    - * The component registers for an RCD might come from the
    - * host-bridge RCRB if they are not already mapped via the
    - * typical register locator mechanism.
    - */
    - if (parent_dport->rch &&
    - cxlds->component_reg_phys == CXL_RESOURCE_NONE) {
    - cxlds->component_reg_phys =
    - cxl_probe_rcrb(&cxlmd->dev, parent_dport->rcrb.base,
    - NULL, CXL_RCRB_UPSTREAM);
    - }
    -
    endpoint = devm_cxl_add_port(host, &cxlmd->dev,
    cxlds->component_reg_phys,
    parent_dport);
    diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
    index 945ca0304d68..54c486cd65dd 100644
    --- a/drivers/cxl/pci.c
    +++ b/drivers/cxl/pci.c
    @@ -274,13 +274,48 @@ static int cxl_pci_setup_mailbox(struct cxl_dev_state *cxlds)
    return 0;
    }

    +/* Extract RCRB, use same function interface as cxl_find_regblock(). */
    +static int cxl_rcrb_get_comp_regs(struct pci_dev *pdev,
    + enum cxl_regloc_type type,
    + struct cxl_register_map *map)
    +{
    + struct cxl_dport *dport;
    + resource_size_t component_reg_phys;
    +
    + memset(map, 0, sizeof(*map));
    + map->dev = &pdev->dev;
    + map->resource = CXL_RESOURCE_NONE;
    +
    + if (type != CXL_REGLOC_RBI_COMPONENT)
    + return -ENODEV;
    +
    + if (!cxl_pci_find_port(pdev, &dport) || !dport->rch)
    + return -ENXIO;
    +
    + component_reg_phys = cxl_probe_rcrb(&pdev->dev, dport->rcrb.base,
    + NULL, CXL_RCRB_UPSTREAM);
    + if (component_reg_phys == CXL_RESOURCE_NONE)
    + return -ENXIO;
    +
    + map->resource = component_reg_phys;
    + map->reg_type = type;
    + map->max_size = CXL_COMPONENT_REG_BLOCK_SIZE;
    +
    + return 0;
    +}
    +
    static int cxl_pci_setup_regs(struct pci_dev *pdev, enum cxl_regloc_type type,
    struct cxl_register_map *map)
    {
    int rc;

    + /*
    + * If the Register Locator DVSEC does not contain the
    + * Component Registers, try to extract them from the RCRB if
    + * it is an RCH.
    + */
    rc = cxl_find_regblock(pdev, type, map);
    - if (rc)
    + if (rc && cxl_rcrb_get_comp_regs(pdev, type, map))
    return rc;

    return cxl_setup_regs(map);
    --
    2.34.1
    \
     
     \ /
      Last update: 2023-05-24 01:26    [W:5.781 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site