lkml.org 
[lkml]   [2023]   [May]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/3] dt-bindings: pinctrl: at91-pio4: Add push-pull support
From
On 17/05/2023 at 13:54, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
>
> Add generic push-pull support for pio4 driver.
>
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
> .../devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> index e2b861ce16d8..774c3c269c40 100644
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> @@ -37,7 +37,8 @@ right representation of the pin.
> Optional properties:
> - GENERIC_PINCONFIG: generic pinconfig options to use:
> - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
> - input-schmitt-enable, input-debounce, output-low, output-high.
> + drive-push-pull input-schmitt-enable, input-debounce, output-low,
> + output-high.
> - for microchip,sama7g5-pinctrl only:
> - slew-rate: 0 - disabled, 1 - enabled (default)
> - atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for

--
Nicolas Ferre

\
 
 \ /
  Last update: 2023-05-22 11:19    [W:0.162 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site