lkml.org 
[lkml]   [2023]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 11/11] arm64: dts: qcom: sm8450: add crypto nodes
    Date
    From: Neil Armstrong <neil.armstrong@linaro.org>

    Add crypto engine (CE) and CE BAM related nodes and definitions
    for the SM8450 SoC.

    Tested-by: Anders Roxell <anders.roxell@linaro.org>
    Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
    Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
    [Bhupesh: Corrected the compatible list]
    Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
    ---
    arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++++++++++++++++++++
    1 file changed, 28 insertions(+)

    diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
    index 595533aeafc4..1c65f7dc67f2 100644
    --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
    +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
    @@ -4138,6 +4138,34 @@ ufs_mem_phy_lanes: phy@1d87400 {
    };
    };

    + cryptobam: dma-controller@1dc4000 {
    + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
    + reg = <0 0x01dc4000 0 0x28000>;
    + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
    + #dma-cells = <1>;
    + qcom,ee = <0>;
    + qcom,controlled-remotely;
    + iommus = <&apps_smmu 0x584 0x11>,
    + <&apps_smmu 0x588 0x0>,
    + <&apps_smmu 0x598 0x5>,
    + <&apps_smmu 0x59a 0x0>,
    + <&apps_smmu 0x59f 0x0>;
    + };
    +
    + crypto: crypto@1de0000 {
    + compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
    + reg = <0 0x01dfa000 0 0x6000>;
    + dmas = <&cryptobam 4>, <&cryptobam 5>;
    + dma-names = "rx", "tx";
    + iommus = <&apps_smmu 0x584 0x11>,
    + <&apps_smmu 0x588 0x0>,
    + <&apps_smmu 0x598 0x5>,
    + <&apps_smmu 0x59a 0x0>,
    + <&apps_smmu 0x59f 0x0>;
    + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
    + interconnect-names = "memory";
    + };
    +
    sdhc_2: mmc@8804000 {
    compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
    reg = <0 0x08804000 0 0x1000>;
    --
    2.38.1
    \
     
     \ /
      Last update: 2023-05-19 23:50    [W:2.612 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site