lkml.org 
[lkml]   [2023]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: dt-bindings: dialog,da7219: convert to dtschema
On Thu, 18 May 2023 09:14:49 +0000, David Rau wrote:
> - Convert Dialog DA7219 bindings to DT schema format.
> - Add Jack insertion detection polarity selection.
> - Remove unused `dlg,ldo-lvl` parameter.
>
> Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
> ---
> .../devicetree/bindings/sound/da7219.txt | 112 --------
> .../bindings/sound/dialog,da7219.yaml | 240 ++++++++++++++++++
> 2 files changed, 240 insertions(+), 112 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/da7219.txt
> create mode 100644 Documentation/devicetree/bindings/sound/dialog,da7219.yaml
>

(partially sending this to make sure that I can actually send these
things during Rob & Krzysztof's absence)

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1783077


da7219@1a: interrupts: [[165, 8], [165, 0]] is too long
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dtb
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dtb
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dtb
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dtb
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dtb
arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtb

\
 
 \ /
  Last update: 2023-05-18 22:06    [W:1.762 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site