lkml.org 
[lkml]   [2023]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] drm/panel: Add driver for Visionox r66451 panel
From


On 5/18/2023 3:37 PM, Dmitry Baryshkov wrote:
> On Fri, 19 May 2023 at 01:17, Jessica Zhang <quic_jesszhan@quicinc.com> wrote:
>>
>>
>>
>> On 5/17/2023 5:19 PM, Dmitry Baryshkov wrote:
>>> On 16/05/2023 23:20, Jessica Zhang wrote:
>>>> Add support for the 1080x2340 Visionox R66451 AMOLED DSI panel that
>>>> comes with the Qualcomm HDK8350 display expansion pack.
>>>>
>>>> The panel enables display compression (DSC v1.2) by default.
>>>>
>>>> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
>>>> ---
>>>> drivers/gpu/drm/panel/Kconfig | 8 +
>>>> drivers/gpu/drm/panel/Makefile | 1 +
>>>> drivers/gpu/drm/panel/panel-visionox-r66451.c | 395
>>>> ++++++++++++++++++++++++++
>>>> 3 files changed, 404 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/panel/Kconfig
>>>> b/drivers/gpu/drm/panel/Kconfig
>>>> index 29cf5fa39ff2..9c2c36dbddf3 100644
>>>> --- a/drivers/gpu/drm/panel/Kconfig
>>>> +++ b/drivers/gpu/drm/panel/Kconfig
>>>> @@ -766,6 +766,14 @@ config DRM_PANEL_VISIONOX_VTDR6130
>>>> Say Y here if you want to enable support for Visionox
>>>> VTDR6130 1080x2400 AMOLED DSI panel.
>>>> +config DRM_PANEL_VISIONOX_R66451
>>>> + tristate "Visionox R66451"
>>>> + depends on OF
>>>> + depends on DRM_MIPI_DSI
>>>> + help
>>>> + Say Y here if you want to enable support for Visionox
>>>> + R66451 1080x2340 AMOLED DSI panel.
>>>> +
>>>> config DRM_PANEL_WIDECHIPS_WS2401
>>>> tristate "Widechips WS2401 DPI panel driver"
>>>> depends on SPI && GPIOLIB
>>>> diff --git a/drivers/gpu/drm/panel/Makefile
>>>> b/drivers/gpu/drm/panel/Makefile
>>>> index b3e8ba29edd3..e043a92ee676 100644
>>>> --- a/drivers/gpu/drm/panel/Makefile
>>>> +++ b/drivers/gpu/drm/panel/Makefile
>>>> @@ -78,5 +78,6 @@ obj-$(CONFIG_DRM_PANEL_TPO_TPG110) +=
>>>> panel-tpo-tpg110.o
>>>> obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
>>>> obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
>>>> obj-$(CONFIG_DRM_PANEL_VISIONOX_VTDR6130) += panel-visionox-vtdr6130.o
>>>> +obj-$(CONFIG_DRM_PANEL_VISIONOX_R66451) += panel-visionox-r66451.o
>>>> obj-$(CONFIG_DRM_PANEL_WIDECHIPS_WS2401) += panel-widechips-ws2401.o
>>>> obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) +=
>>>> panel-xinpeng-xpp055c272.o
>>>> diff --git a/drivers/gpu/drm/panel/panel-visionox-r66451.c
>>>> b/drivers/gpu/drm/panel/panel-visionox-r66451.c
>>>> new file mode 100644
>>>> index 000000000000..e3648ead3e84
>>>> --- /dev/null
>>>> +++ b/drivers/gpu/drm/panel/panel-visionox-r66451.c
>>>> @@ -0,0 +1,395 @@
>>>> +//SPDX-License-Identifier: GPL-2.0-only
>>>> +//Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>>>> reserved.
>>>> +
>>>> +#include <linux/backlight.h>
>>>> +#include <linux/delay.h>
>>>> +#include <linux/gpio/consumer.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of.h>
>>>> +#include <linux/regulator/consumer.h>
>>>> +
>>>> +#include <drm/drm_mipi_dsi.h>
>>>> +#include <drm/drm_modes.h>
>>>> +#include <drm/drm_panel.h>
>>>> +#include <drm/display/drm_dsc.h>
>>>> +#include <drm/display/drm_dsc_helper.h>
>>>> +
>>>> +#include <video/mipi_display.h>
>>>> +
>>>> +struct visionox_r66451 {
>>>> + struct drm_panel panel;
>>>> + struct mipi_dsi_device *dsi;
>>>> + struct gpio_desc *reset_gpio;
>>>> + struct regulator_bulk_data supplies[2];
>>>> + bool prepared, enabled;
>>>> +};
>>>> +
>>>> +static inline struct visionox_r66451 *to_visionox_r66451(struct
>>>> drm_panel *panel)
>>>> +{
>>>> + return container_of(panel, struct visionox_r66451, panel);
>>>> +}
>>>> +
>>>> +static void visionox_r66451_reset(struct visionox_r66451 *ctx)
>>>> +{
>>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>>> + usleep_range(10000, 10100);
>>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>>> + usleep_range(10000, 10100);
>>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>>> + usleep_range(10000, 10100);
>>>> +}
>>>> +
>>>> +static int visionox_r66451_on(struct visionox_r66451 *ctx)
>>>> +{
>>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>>> + struct device *dev = &dsi->dev;
>>>> + int ret;
>>>> +
>>>> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>>>> +
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xc2,
>>>> + 0x09, 0x24, 0x0c, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
>>>> + 0x09, 0x3c);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xd7,
>>>> + 0x00, 0xb9, 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
>>>> + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
>>>> + 0x3c, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xde,
>>>> + 0x40, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18,
>>>> + 0x10, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x02,
>>>> 0x00, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xe8, 0x00, 0x02);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x00, 0x08);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xc4,
>>>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x32);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xcf,
>>>> + 0x64, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08,
>>>> + 0x00, 0x0b, 0x77, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
>>>> + 0x02, 0x02, 0x02, 0x02, 0x02, 0x03);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xd3,
>>>> + 0x45, 0x00, 0x00, 0x01, 0x13, 0x15, 0x00, 0x15, 0x07,
>>>> + 0x0f, 0x77, 0x77, 0x77, 0x37, 0xb2, 0x11, 0x00, 0xa0,
>>>> + 0x3c, 0x9c);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xd7,
>>>> + 0x00, 0xb9, 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a,
>>>> + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x19,
>>>> + 0x34, 0x00, 0x40, 0x04, 0x00, 0xa0, 0x0a);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xd8,
>>>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x3a,
>>>> + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x00, 0x0a, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0a,
>>>> + 0x00, 0x32, 0x00, 0x0a, 0x00, 0x22);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xdf,
>>>> + 0x50, 0x42, 0x58, 0x81, 0x2d, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x01, 0x0f, 0xff, 0xd4, 0x0e, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x00, 0x00, 0x0f, 0x53, 0xf1, 0x00, 0x00,
>>>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x01);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x80);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xe4, 0x34, 0xb4, 0x00, 0x00, 0x00,
>>>> 0x39, 0x04, 0x09, 0x34);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xe6, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x04);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x40);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x50, 0x00, 0x00, 0x00, 0x00);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x11);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf3, 0x01, 0x00, 0x00, 0x00, 0x01);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf4, 0x00, 0x02);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xf2, 0x19);
>>>> + mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x50, 0x42);
>>>> + mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>>>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00,
>>>> 0x00, 0x04, 0x37);
>>>
>>> Please use mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);
>>
>> Hi Dmitry,
>>
>> Acked.
>>
>>>
>>>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PAGE_ADDRESS, 0x00,
>>>> 0x00, 0x09, 0x23);
>>>
>>> mipi_dsi_dcs_set_page_address(dsi, 0, 2340 - 1);
>>
>> Acked.
>>
>>>
>>>> +
>>>> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> + msleep(120);
>>>> +
>>>> + ret = mipi_dsi_dcs_set_display_on(dsi);
>>>
>>> Should the mipi_dsi_dcs_set_display_on() (and maybe exit sleep mode) be
>>> a a part of _enable()? Correspondingly _off should IMO be a part of
>>> _disable callback().
>>
>> Acked. Looking at the downstream code, it seems that all the dcs on
>> commands can be sent within _enable() (and similarly for the off
>> commands with _disable()).
>
> I wouldn't check against the downstream. The distinction is that
> prepare() is called before enabling the video stream and as such it
> usually contains commands to set up the panel parameters. The enable()
> callback is called after starting the video stream, so it should just
> turn on the image output, the backlight, etc..

Hi Dmitry,

Got it.

>
>>
>>>
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed on set display on: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> + msleep(20);
>>>
>>>
>>> Do we need to add here the following line?
>>>
>>> dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>>
>> Do you mean within the return on error block?
>
> Within the return. I think this might depend on the panel itself, see
> how other panels handle toggling MIPI_DSI_MODE_LPM. E.g. panel-dsi-cm
> or panel-novatek-nt35950 unsets MIPI_DSI_MODE_LPM at the end of
> power_on. Some of the panels also toggle LPM while reading or updating
> the backlight.

Understood. FWIW, I'm seeing that there are others like
panel-visionox-vtdr6130.c that don't unset MODE_LPM after sending the
DCS commands.

I'll double check what we should be doing for r66451.

Thanks,

Jessica Zhang

>
>>
>> From my understanding, we should be setting the MIPI_DSI_MODE_LPM for
>> panel_on() then unsetting MODE_LPM in panel_off().
>>
>>>
>>>
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int visionox_r66451_off(struct visionox_r66451 *ctx)
>>>> +{
>>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>>> + struct device *dev = &dsi->dev;
>>>> + int ret;
>>>> +
>>>> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>>>> +
>>>> + ret = mipi_dsi_dcs_set_display_off(dsi);
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed to set display off: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> + msleep(20);
>>>> +
>>>> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>>>> + return ret;
>>>> + }
>>>> + msleep(120);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int visionox_r66451_prepare(struct drm_panel *panel)
>>>> +{
>>>> + struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>>>> + struct device *dev = &ctx->dsi->dev;
>>>> + int ret;
>>>> +
>>>> + if (ctx->prepared)
>>>> + return 0;
>>>> +
>>>> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
>>>> + ctx->supplies);
>>>> + if (ret < 0)
>>>> + return ret;
>>>> +
>>>> + visionox_r66451_reset(ctx);
>>>> +
>>>> + ret = visionox_r66451_on(ctx);
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
>>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>>> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies),
>>>> ctx->supplies);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ctx->prepared = true;
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int visionox_r66451_unprepare(struct drm_panel *panel)
>>>> +{
>>>> + struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>>>> + struct device *dev = &ctx->dsi->dev;
>>>> + int ret;
>>>> +
>>>> + if (!ctx->prepared)
>>>> + return 0;
>>>> +
>>>> + ret = visionox_r66451_off(ctx);
>>>> + if (ret < 0)
>>>> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
>>>> +
>>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>>> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>>>> +
>>>> + ctx->prepared = false;
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static const struct drm_display_mode visionox_r66451_mode = {
>>>> + .clock = (1080 + 95 + 1 + 40) * (2340 + 25 + 1 + 4) * 120 / 1000,
>>>> + .hdisplay = 1080,
>>>> + .hsync_start = 1080 + 95,
>>>> + .hsync_end = 1080 + 95 + 1,
>>>> + .htotal = 1080 + 95 + 1 + 40,
>>>> + .vdisplay = 2340,
>>>> + .vsync_start = 2340 + 25,
>>>> + .vsync_end = 2340 + 25 + 1,
>>>> + .vtotal = 2340 + 25 + 1 + 4,
>>>> + .width_mm = 0,
>>>> + .height_mm = 0,
>>>
>>> Please provide real values here.
>>
>> Acked.
>>
>>>
>>>> +};
>>>> +
>>>> +static int visionox_r66451_enable(struct drm_panel *panel)
>>>> +{
>>>> + struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>>> + struct drm_dsc_picture_parameter_set pps;
>>>> + int ret;
>>>> +
>>>> + if (ctx->enabled)
>>>> + return 0;
>>>> +
>>>> + if (!dsi->dsc) {
>>>> + dev_err(&dsi->dev, "DSC not attached to DSI\n");
>>>> + return -ENODEV;
>>>> + }
>>>> +
>>>> + drm_dsc_pps_payload_pack(&pps, dsi->dsc);
>>>> + ret = mipi_dsi_picture_parameter_set(dsi, &pps);
>>>> +
>>>> + ctx->enabled = true;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int visionox_r66451_disable(struct drm_panel *panel)
>>>> +{
>>>> + struct visionox_r66451 *ctx = to_visionox_r66451(panel);
>>>> +
>>>> + ctx->enabled = false;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int visionox_r66451_get_modes(struct drm_panel *panel,
>>>> + struct drm_connector *connector)
>>>> +{
>>>> + struct drm_display_mode *mode;
>>>> +
>>>> + mode = drm_mode_duplicate(connector->dev, &visionox_r66451_mode);
>>>> + if (!mode)
>>>> + return -ENOMEM;
>>>> +
>>>> + drm_mode_set_name(mode);
>>>> +
>>>> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>>>> + connector->display_info.width_mm = mode->width_mm;
>>>> + connector->display_info.height_mm = mode->height_mm;
>>>> + drm_mode_probed_add(connector, mode);
>>>
>>> Can we use drm_connector_helper_get_modes_fixed() instead?
>>
>> Acked.
>>
>>>
>>>> +
>>>> + return 1;
>>>> +}
>>>> +
>>>> +static const struct drm_panel_funcs visionox_r66451_funcs = {
>>>> + .prepare = visionox_r66451_prepare,
>>>> + .unprepare = visionox_r66451_unprepare,
>>>> + .get_modes = visionox_r66451_get_modes,
>>>> + .enable = visionox_r66451_enable,
>>>> + .disable = visionox_r66451_disable,
>>>> +};
>>>> +
>>>> +static int visionox_r66451_bl_update_status(struct backlight_device *bl)
>>>> +{
>>>> + struct mipi_dsi_device *dsi = bl_get_data(bl);
>>>> + u16 brightness = backlight_get_brightness(bl);
>>>> +
>>>> + return mipi_dsi_dcs_set_display_brightness(dsi,
>>>> cpu_to_le16(brightness));
>>>
>>> mipi_dsi_dcs_set_display_brightness() already converts the brightness,
>>> so you don't need cpu_to_le16 here.
>>
>> Acked.
>>
>> Thanks,
>>
>> Jessica Zhang
>>
>>>
>>>> +}
>>>> +
>>>> +static const struct backlight_ops visionox_r66451_bl_ops = {
>>>> + .update_status = visionox_r66451_bl_update_status,
>>>> +};
>>>> +
>>>> +static struct backlight_device *
>>>> +visionox_r66451_create_backlight(struct mipi_dsi_device *dsi)
>>>> +{
>>>> + struct device *dev = &dsi->dev;
>>>> + const struct backlight_properties props = {
>>>> + .type = BACKLIGHT_RAW,
>>>> + .brightness = 255,
>>>> + .max_brightness = 4095,
>>>> + };
>>>> +
>>>> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
>>>> + &visionox_r66451_bl_ops, &props);
>>>> +}
>>>> +
>>>> +static int visionox_r66451_probe(struct mipi_dsi_device *dsi)
>>>> +{
>>>> + struct device *dev = &dsi->dev;
>>>> + struct visionox_r66451 *ctx;
>>>> + struct drm_dsc_config *dsc;
>>>> + int ret = 0;
>>>> +
>>>> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>>>> + if (!ctx)
>>>> + return -ENOMEM;
>>>> +
>>>> + dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
>>>> + if (!dsc)
>>>> + return -ENOMEM;
>>>> +
>>>> + /* Set DSC params */
>>>> + dsc->dsc_version_major = 0x1;
>>>> + dsc->dsc_version_minor = 0x2;
>>>> +
>>>> + dsc->slice_height = 20;
>>>> + dsc->slice_width = 540;
>>>> + dsc->slice_count = 2;
>>>> + dsc->bits_per_component = 8;
>>>> + dsc->bits_per_pixel = 0x8 << 4;
>>>> + dsc->block_pred_enable = true;
>>>> +
>>>> + dsi->dsc = dsc;
>>>> +
>>>> + ctx->supplies[0].supply = "vddio";
>>>> + ctx->supplies[1].supply = "vdd";
>>>> +
>>>> + ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
>>>> + ctx->supplies);
>>>> +
>>>> + if (ret < 0)
>>>> + return ret;
>>>> +
>>>> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>>>> + if (IS_ERR(ctx->reset_gpio))
>>>> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "Failed
>>>> to get reset-gpios\n");
>>>> +
>>>> + ctx->dsi = dsi;
>>>> + mipi_dsi_set_drvdata(dsi, ctx);
>>>> +
>>>> + dsi->lanes = 4;
>>>> + dsi->format = MIPI_DSI_FMT_RGB888;
>>>> + dsi->mode_flags = MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
>>>> +
>>>> + drm_panel_init(&ctx->panel, dev, &visionox_r66451_funcs,
>>>> DRM_MODE_CONNECTOR_DSI);
>>>> + ctx->panel.backlight = visionox_r66451_create_backlight(dsi);
>>>> + if (IS_ERR(ctx->panel.backlight))
>>>> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
>>>> + "Failed to create backlight\n");
>>>> +
>>>> + drm_panel_add(&ctx->panel);
>>>> +
>>>> + ret = mipi_dsi_attach(dsi);
>>>> + if (ret < 0) {
>>>> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>>>> + drm_panel_remove(&ctx->panel);
>>>> + }
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static void visionox_r66451_remove(struct mipi_dsi_device *dsi)
>>>> +{
>>>> + struct visionox_r66451 *ctx = mipi_dsi_get_drvdata(dsi);
>>>> + int ret;
>>>> +
>>>> + ret = mipi_dsi_detach(dsi);
>>>> + if (ret < 0)
>>>> + dev_err(&dsi->dev, "Failed to detach DSI host: %d\n", ret);
>>>> +
>>>> + drm_panel_remove(&ctx->panel);
>>>> +}
>>>> +
>>>> +static const struct of_device_id visionox_r66451_of_match[] = {
>>>> + {.compatible = "visionox,r66451"},
>>>> + { /*sentinel*/ }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, visionox_r66451_of_match);
>>>> +
>>>> +static struct mipi_dsi_driver visionox_r66451_driver = {
>>>> + .probe = visionox_r66451_probe,
>>>> + .remove = visionox_r66451_remove,
>>>> + .driver = {
>>>> + .name = "panel-visionox-r66451",
>>>> + .of_match_table = visionox_r66451_of_match,
>>>> + },
>>>> +};
>>>> +
>>>> +module_mipi_dsi_driver(visionox_r66451_driver);
>>>> +
>>>> +MODULE_AUTHOR("Jessica Zhang <quic_jesszhan@quicinc.com>");
>>>> +MODULE_DESCRIPTION("Panel driver for the Visionox R66451 AMOLED DSI
>>>> panel");
>>>> +MODULE_LICENSE("GPL");
>>>>
>>>
>>> --
>>> With best wishes
>>> Dmitry
>>>
>
>
>
> --
> With best wishes
> Dmitry

\
 
 \ /
  Last update: 2023-05-19 02:30    [W:0.112 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site