lkml.org 
[lkml]   [2023]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/2] Add initial support for RDP418 of IPQ9574 family
From


On 5/10/2023 4:13 PM, Devi Priya wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 418 based on IPQ9574 family of SoC. This patch series adds
> support for Console UART, SPI NOR, eMMC and SMPA1 regulator node.
>
This series depends on the below patch sets which adds support for
SPI NOR and SMPA1 regulator nodes.
https://lore.kernel.org/linux-arm-msm/20230329053726.14860-3-quic_kathirav@quicinc.com/
https://lore.kernel.org/linux-arm-msm/20230407155727.20615-1-quic_devipriy@quicinc.com/

Thanks,
Devi Priya
> Devi Priya (2):
> dt-bindings: arm: qcom: document AL02-C2 board based on IPQ9574 family
> arm64: dts: qcom: ipq9574: add support for RDP418 variant
>
> .../devicetree/bindings/arm/qcom.yaml | 2 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 124 ++++++++++++++++++
> 3 files changed, 127 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
>
>
> base-commit: 52025ebbb518a2d876b8aba191b348ffb1cf368b

\
 
 \ /
  Last update: 2023-05-16 15:58    [W:0.110 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site