lkml.org 
[lkml]   [2023]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/23] arm64: zynqmp: Fix usb node drive strength and slew rate
Hi Laurent

On 5/10/23 08:54, Laurent Pinchart wrote:
> Hi Michal,
>
> Thank you for the patch.
>
> On Tue, May 02, 2023 at 03:35:30PM +0200, Michal Simek wrote:
>> From: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
>>
>> As per design, all input/rx pins should have fast slew rate and 12mA
>> drive strength.
>
> Why does the slow rate and drive strength matter for input pins ?

In design tools all inputs pins are setup like described by default.
That's why it could suggest that there is no need to describe default
configuration in DT.
But all MIOs can be used as GPIOs where pinctrl can change their default values
to something else. That's why setting up default values is to be safe even for
input pins. I don't know HW details to that extend but that values can also
change input behavior that's why having default is not a bad idea.

Maybe make sense to extend commit message to describe it better.

Thanks,
Michal

\
 
 \ /
  Last update: 2023-05-16 15:31    [W:0.145 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site