lkml.org 
[lkml]   [2023]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 00/10 RESEND] Add RT5033 charger device driver
    Date
    This patchset adds the charger driver "rt5033-charger". It is part of the
    multifunction device rt5033. The patchset is based on an older version by
    Beomho Seo of March 2015. For more information on the history and setup of
    the patchset see the cover sheet of version v1, there is a link further down
    below the changelog.

    RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
    was split into two threads on the lore list. Therefore sending it again.

    Changes in v6:
    - Patch 5: In function rt5033_charger_probe() after
    calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
    to "PTR_ERR(charger->chg)", as suggested by Christophe.
    - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
    "additionalProperties: false" by "unevaluatedProperties: false", as
    suggested by Krzysztof.

    v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@rocketmail.com/T/#t
    v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@rocketmail.com/T/#t
    v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@rocketmail.com/T/#t
    v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@rocketmail.com/T/#t
    v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@rocketmail.com/T/#t

    The result of the patchset v6 can be seen at:
    https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c

    Jakob Hauser (9):
    mfd: rt5033: Fix chip revision readout
    mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
    mfd: rt5033: Apply preparatory changes before adding rt5033-charger
    driver
    power: supply: rt5033_charger: Add RT5033 charger device driver
    power: supply: rt5033_charger: Add cable detection and USB OTG supply
    power: supply: rt5033_battery: Move struct rt5033_battery to battery
    driver
    power: supply: rt5033_battery: Adopt status property from charger
    dt-bindings: power: supply: rt5033-battery: Apply
    unevaluatedProperties
    dt-bindings: Add rt5033 mfd, regulator and charger

    Stephan Gerhold (1):
    mfd: rt5033: Drop rt5033-battery sub-device

    .../bindings/mfd/richtek,rt5033.yaml | 138 ++++
    .../power/supply/richtek,rt5033-battery.yaml | 2 +-
    .../power/supply/richtek,rt5033-charger.yaml | 65 ++
    drivers/mfd/rt5033.c | 8 +-
    drivers/power/supply/Kconfig | 8 +
    drivers/power/supply/Makefile | 1 +
    drivers/power/supply/rt5033_battery.c | 38 +-
    drivers/power/supply/rt5033_charger.c | 744 ++++++++++++++++++
    include/linux/mfd/rt5033-private.h | 64 +-
    include/linux/mfd/rt5033.h | 24 -
    10 files changed, 1034 insertions(+), 58 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
    create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
    create mode 100644 drivers/power/supply/rt5033_charger.c

    --
    2.39.2

    \
     
     \ /
      Last update: 2023-05-15 22:58    [W:3.744 / U:0.488 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site