Messages in this thread | | | Date | Thu, 11 May 2023 07:29:21 +0200 | Subject | Re: [PATCH net-next 0/8] Improvements for RealTek 2.5G Ethernet PHYs | From | Heiner Kallweit <> |
| |
On 11.05.2023 00:53, Daniel Golle wrote: > Improve support for RealTek 2.5G Ethernet PHYs (RTL822x series). > The PHYs can operate with Clause-22 and Clause-45 MDIO. > > When using Clause-45 it is desireable to avoid rate-adapter mode and > rather have the MAC interface mode follow the PHY speed. The PHYs > support 2500Base-X for 2500M, and Cisco SGMII for 1000M/100M/10M. > > Also prepare support for proprietary RealTek HiSGMII mode which will > be needed for situations when used with RealTek switch or router SoCs > such as RTL839x or RTL93xx. > > Add support for Link Down Power Saving Mode (ALDPS) which is already > supported for older RTL821x series 1GbE PHYs. > > Make sure that link-partner advertised modes are only used if the > advertisement can be considered valid. Otherwise we are seeing > false-positives warning about downscaling eventhough higher speeds > are not actually advertised by the link partner. > > While at it, use helper function for paged operation and make sure > to use use locking for that as well. > > Changes since RFC: > * Turns out paged read used to identify the PHY needs to be hardcoded > for the simple reason that the function pointers for paged operations > have not yet been populated at this point. Hence keep open-coding it, > but use helper function and make sure it happening while the MDIO bus > mutex is locked. > > Alexander Couzens (1): > net: phy: realtek: rtl8221: allow to configure SERDES mode > > Chukun Pan (1): > net: phy: realtek: switch interface mode for RTL822x series > > Daniel Golle (6): > net: phy: realtek: use genphy_soft_reset for 2.5G PHYs > net: phy: realtek: disable SGMII in-band AN for 2.5G PHYs > net: phy: realtek: make sure paged read is protected by mutex > net: phy: realtek: use inline functions for 10GbE advertisement > net: phy: realtek: check validity of 10GbE link-partner advertisement > net: phy: realtek: setup ALDPS on RTL8221B > > drivers/net/phy/realtek.c | 161 ++++++++++++++++++++++++++++++++------ > 1 file changed, 138 insertions(+), 23 deletions(-) >
Has this series been tested with RTL8125A/B to ensure that the internal PHY use case still works?
| |