lkml.org 
[lkml]   [2023]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled
From
On 11/05/2023 01:07, Kuogee Hsieh wrote:
> Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
> dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
> to tear down DSC data path if DSC data path was setup previous.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 44 +++++++++++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++++
> 2 files changed, 51 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 94b805b..6500589 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1214,6 +1214,45 @@ static void dpu_encoder_virt_atomic_enable(struct drm_encoder *drm_enc,
> mutex_unlock(&dpu_enc->enc_lock);
> }
>
> +static void dpu_encoder_dsc_pipe_clr(struct dpu_encoder_virt *dpu_enc,
> + struct dpu_hw_dsc *hw_dsc,
> + struct dpu_hw_pingpong *hw_pp)
> +{
> + struct dpu_encoder_phys *cur_master = dpu_enc->cur_master;
> + struct dpu_hw_ctl *ctl;
> +
> + ctl = cur_master->hw_ctl;
> +
> + if (hw_dsc->ops.dsc_disable)
> + hw_dsc->ops.dsc_disable(hw_dsc);
> +
> + if (hw_pp->ops.disable_dsc)
> + hw_pp->ops.disable_dsc(hw_pp);
> +
> + if (hw_dsc->ops.dsc_bind_pingpong_blk)
> + hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
> +
> + if (ctl->ops.update_pending_flush_dsc)
> + ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
> +}
> +
> +static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
> +{
> + /* coding only for 2LM, 2enc, 1 dsc config */
> + struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
> + struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
> + int i;
> +
> + for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
> + hw_pp[i] = dpu_enc->hw_pp[i];
> + hw_dsc[i] = dpu_enc->hw_dsc[i];
> +
> + if (hw_pp[i] && hw_dsc[i])
> + dpu_encoder_dsc_pipe_clr(dpu_enc, hw_dsc[i], hw_pp[i]);
> + }
> +
> +}
> +
> static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> struct drm_atomic_state *state)
> {
> @@ -2090,6 +2129,9 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> phys_enc->hw_pp->merge_3d->idx);
> }
>
> + if (dpu_enc->dsc)
> + dpu_encoder_unprep_dsc(dpu_enc);
> +
> intf_cfg.stream_sel = 0; /* Don't care value for video mode */
> intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
>
> @@ -2101,6 +2143,8 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
> if (phys_enc->hw_pp->merge_3d)
> intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
>
> + intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +
> if (ctl->ops.reset_intf_cfg)
> ctl->ops.reset_intf_cfg(ctl, &intf_cfg);
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 832a6a7..b34dac5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -577,6 +577,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> u32 intf_active = 0;
> u32 wb_active = 0;
> u32 merge3d_active = 0;
> + u32 dsc_active;
>
> /*
> * This API resets each portion of the CTL path namely,
> @@ -606,6 +607,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> wb_active &= ~BIT(cfg->wb - WB_0);
> DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
> }
> +
> + if (cfg->dsc) {
> + dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
> + dsc_active &= ~cfg->dsc;
> + DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
> + }
> }
>
> static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-05-11 06:57    [W:0.098 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site