lkml.org 
[lkml]   [2023]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2 1/4] spi: dt-bindings: Introduce spi-mosi-idle-low flag
    On Fri, May 12, 2023 at 01:13:14AM +0200, Boerge Struempfel wrote:
    > Some spi controller switch the mosi line to high, whenever they are
    > idle. This may not be desired in all use cases. For example neopixel
    > leds can get confused and flicker due to misinterpreting the idle state.
    > Therefore, we introduce a new spi-mode bit, with which the idle behaviour
    > can be overwritten on a per device basis.
    >
    > Signed-off-by: Boerge Struempfel <bstruempfel@ultratronik.de>
    > ---
    > .../devicetree/bindings/spi/spi-peripheral-props.yaml | 6 ++++++

    If this is always required for a given device (which I'd expect to be
    the case) why configure it through DT? I know we've got some legacy
    stuff like that but not all legacy DT choices were good and no need to
    continue the pattern.
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2023-05-12 05:31    [W:2.518 / U:0.328 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site