lkml.org 
[lkml]   [2023]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/2] Input: st1232: wakeup in Suspend to idle
From
Gentle ping.

On 03.04.23 14:47, Javier Carrasco wrote:
> The st1232 touchscreen provides an interrupt line that can be configured
> as a wakeup source, and currently it is possible to use this mechanism in
> "Suspend to RAM" and "Hibernate" power states.
>
> Unfortunately, that does not work in "Suspend to idle" (freeze) because
> the device driver disables the interrupts in its suspend callback.
> Given that the interrupt handling prior to entering the mentioned power
> state modes is managed by the power subsystem, the irq enabling/disabling
> can be removed from the touchscreen driver, allowing the device to work
> as a wakeup source in "Suspend to idle".
>
> Given that the st1232 device driver does not reflect its wakeup events
> in sysfs, this series also adds pm_wakeup_event to the interrupt
> handler.
>
> These changes have been successfully tested with an ST1624-N32C and a
> Rockchip-based platform.
>
> Javier Carrasco (2):
> Input: st1232 - remove enable/disable irq in resume/suspend callbacks
> Input: st1232 - add wake up event counting
>
> drivers/input/touchscreen/st1232.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>

\
 
 \ /
  Last update: 2023-05-10 10:43    [W:0.104 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site