lkml.org 
[lkml]   [2023]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] drm/sun4i: uncouple DSI dotclock divider from TCON0_DCLK_REG
From
Hello Maxime,

On Wed Mar 29, 2023 at 9:58 PM CEST, Maxime Ripard wrote:
> > In order to preserve semantic correctness however, I propose to preface
> > the change with a patch that renames sun4i_dotclock and tcon-pixel-clock
> > such that dot/pixel is replaced with d/data. What do you think?
>
> I don't think it's exposed to the userspace in any way so it makes sense to me
>

Here's a new series that includes those renames:
<https://lore.kernel.org/all/20230331110245.43527-1-me@crly.cz/>

It turns out however that the new dclk rates can't be set exactly as
requested without touching pll-video0*, tcon0 now therefore gets
reparented from pll-mipi to pll-video0-2x which, as it further turns
out, breaks DSI. While simply forbidding the video0-2x mux option seems
to me as the right way to go because there's not much use for it with
non-DSI interfaces either besides the opportunity to power pll-mipi
down, I'd like to run by you first.

Kind regards,
Roman

* As pll-mipi doesn't have CLK_SET_RATE_PARENT flag set, pll-video0
retains its boot-time rate of 294 MHz set by sunxi-dw-hdmi driver
in u-boot. Why 294 MHz (as opposed to the default rate of 297 MHz)?
The driver actually asks for 297 MHz, clock_set_pll3 rounds it to
294 MHz though because it limits itself to 6 MHz steps.

\
 
 \ /
  Last update: 2023-04-05 14:35    [W:0.160 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site