lkml.org 
[lkml]   [2023]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v12 00/25] Drivers for Gunyah hypervisor
From


On 4/24/2023 4:15 PM, Elliot Berman wrote:
> Gunyah is a Type-1 hypervisor independent of any
> high-level OS kernel, and runs in a higher CPU privilege level. It does
> not depend on any lower-privileged OS kernel/code for its core
> functionality. This increases its security and can support a much smaller
> trusted computing base than a Type-2 hypervisor.
>
> Gunyah is an open source hypervisor. The source repo is available at
> https://github.com/quic/gunyah-hypervisor.
>
> The diagram below shows the architecture.
>
> ::
>
> VM A VM B
> +-----+ +-----+ | +-----+ +-----+ +-----+
> | | | | | | | | | | |
> EL0 | APP | | APP | | | APP | | APP | | APP |
> | | | | | | | | | | |
> +-----+ +-----+ | +-----+ +-----+ +-----+
> ---------------------|-------------------------
> +--------------+ | +----------------------+
> | | | | |
> EL1 | Linux Kernel | | |Linux kernel/Other OS | ...
> | | | | |
> +--------------+ | +----------------------+
> --------hvc/smc------|------hvc/smc------------
> +----------------------------------------+
> | |
> EL2 | Gunyah Hypervisor |
> | |
> +----------------------------------------+
>
> Gunyah provides these following features.
>
> - Threads and Scheduling: The scheduler schedules virtual CPUs (VCPUs) on
> physical CPUs and enables time-sharing of the CPUs.
> - Memory Management: Gunyah tracks memory ownership and use of all memory
> under its control. Memory partitioning between VMs is a fundamental
> security feature.
> - Interrupt Virtualization: All interrupts are handled in the hypervisor
> and routed to the assigned VM.
> - Inter-VM Communication: There are several different mechanisms provided
> for communicating between VMs.
> - Device Virtualization: Para-virtualization of devices is supported using
> inter-VM communication. Low level system features and devices such as
> interrupt controllers are supported with emulation where required.
>
> This series adds the basic framework for detecting that Linux is running
> under Gunyah as a virtual machine, communication with the Gunyah Resource
> Manager, and a sample virtual machine manager capable of launching virtual machines.
>
> The series relies on two other patches posted separately:
> - https://lore.kernel.org/all/20230213181832.3489174-1-quic_eberman@quicinc.com/
> - https://lore.kernel.org/all/20230213232537.2040976-2-quic_eberman@quicinc.com/
>
> Changes in v12:
> - Stylistic/cosmetic tweaks suggested by Alex
> - Remove patch "virt: gunyah: Identify hypervisor version" and squash the
> check that we're running under a reasonable Gunyah hypervisor into RM driver
> - Refactor platform hooks into a separate module per suggestion from Srini
> - GFP_KERNEL_ACCOUNT and account_locked_vm() for page pinning
> - enum-ify related constant
The series is being applied onto the Android Common Kernel android14-6.1
branch and I've posted a series to bring the branch from v11 to v12.
This would show what changed between the two versions:

https://android-review.googlesource.com/q/hashtag:%22gunyah-v12%22+(status:open%20OR%20status:merged)

> - Allow removal of VM functions by function-specific comparison -- specifically to allow
> removing irqfd by label only and not requiring original FD to be provided.
>

This last bullet point will be included in v13.

> Changes in v11: https://lore.kernel.org/all/20230304010632.2127470-1-quic_eberman@quicinc.com/
> - Rename struct gh_vm_dtb_config:gpa -> guest_phys_addr & overflow checks for this
> - More docstrings throughout
> - Make resp_buf and resp_buf_size optional
> - Replace deprecated idr with xarray
> - Refconting on misc device instead of RM's platform device
> - Renaming variables, structs, etc. from gunyah_ -> gh_
> - Drop removal of user mem regions
> - Drop mem_lend functionality; to converge with restricted_memfd later
>
> Changes in v10: https://lore.kernel.org/all/20230214211229.3239350-1-quic_eberman@quicinc.com/
> - Fix bisectability (end result of series is same, --fixups applied to wrong commits)
> - Convert GH_ERROR_* and GH_RM_ERROR_* to enums
> - Correct race condition between allocating/freeing user memory
> - Replace offsetof with struct_size
> - Series-wide renaming of functions to be more consistent
> - VM shutdown & restart support added in vCPU and VM Manager patches
> - Convert VM function name (string) to type (number)
> - Convert VM function argument to value (which could be a pointer) to remove memory wastage for arguments
> - Remove defensive checks of hypervisor correctness
> - Clean ups to ioeventfd as suggested by Srivatsa
>
> Changes in v9: https://lore.kernel.org/all/20230120224627.4053418-1-quic_eberman@quicinc.com/
> - Refactor Gunyah API flags to be exposed as feature flags at kernel level
> - Move mbox client cleanup into gunyah_msgq_remove()
> - Simplify gh_rm_call return value and response payload
> - Missing clean-up/error handling/little endian fixes as suggested by Srivatsa and Alex in v8 series
>
> Changes in v8: https://lore.kernel.org/all/20221219225850.2397345-1-quic_eberman@quicinc.com/
> - Treat VM manager as a library of RM
> - Add patches 21-28 as RFC to support proxy-scheduled vCPUs and necessary bits to support virtio
> from Gunyah userspace
>
> Changes in v7: https://lore.kernel.org/all/20221121140009.2353512-1-quic_eberman@quicinc.com/
> - Refactor to remove gunyah RM bus
> - Refactor allow multiple RM device instances
> - Bump UAPI to start at 0x0
> - Refactor QCOM SCM's platform hooks to allow CONFIG_QCOM_SCM=Y/CONFIG_GUNYAH=M combinations
>
> Changes in v6: https://lore.kernel.org/all/20221026185846.3983888-1-quic_eberman@quicinc.com/
> - *Replace gunyah-console with gunyah VM Manager*
> - Move include/asm-generic/gunyah.h into include/linux/gunyah.h
> - s/gunyah_msgq/gh_msgq/
> - Minor tweaks and documentation tidying based on comments from Jiri, Greg, Arnd, Dmitry, and Bagas.
>
> Changes in v5: https://lore.kernel.org/all/20221011000840.289033-1-quic_eberman@quicinc.com/
> - Dropped sysfs nodes
> - Switch from aux bus to Gunyah RM bus for the subdevices
> - Cleaning up RM console
>
> Changes in v4: https://lore.kernel.org/all/20220928195633.2348848-1-quic_eberman@quicinc.com/
> - Tidied up documentation throughout based on questions/feedback received
> - Switched message queue implementation to use mailboxes
> - Renamed "gunyah_device" as "gunyah_resource"
>
> Changes in v3: https://lore.kernel.org/all/20220811214107.1074343-1-quic_eberman@quicinc.com/
> - /Maintained/Supported/ in MAINTAINERS
> - Tidied up documentation throughout based on questions/feedback received
> - Moved hypercalls into arch/arm64/gunyah/; following hyper-v's implementation
> - Drop opaque typedefs
> - Move sysfs nodes under /sys/hypervisor/gunyah/
> - Moved Gunyah console driver to drivers/tty/
> - Reworked gh_device design to drop the Gunyah bus.
>
> Changes in v2: https://lore.kernel.org/all/20220801211240.597859-1-quic_eberman@quicinc.com/
> - DT bindings clean up
> - Switch hypercalls to follow SMCCC
>
> v1: https://lore.kernel.org/all/20220223233729.1571114-1-quic_eberman@quicinc.com/
>
> Elliot Berman (25):
> docs: gunyah: Introduce Gunyah Hypervisor
> dt-bindings: Add binding for gunyah hypervisor
> gunyah: Common types and error codes for Gunyah hypercalls
> virt: gunyah: Add hypercalls to identify Gunyah
> virt: gunyah: msgq: Add hypercalls to send and receive messages
> mailbox: Add Gunyah message queue mailbox
> gunyah: rsc_mgr: Add resource manager RPC core
> gunyah: rsc_mgr: Add VM lifecycle RPC
> gunyah: vm_mgr: Introduce basic VM Manager
> gunyah: rsc_mgr: Add RPC for sharing memory
> gunyah: vm_mgr: Add/remove user memory regions
> gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
> samples: Add sample userspace Gunyah VM Manager
> gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
> firmware: qcom_scm: Register Gunyah platform ops
> docs: gunyah: Document Gunyah VM Manager
> virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
> gunyah: vm_mgr: Add framework for VM Functions
> virt: gunyah: Add resource tickets
> virt: gunyah: Add IO handlers
> virt: gunyah: Add proxy-scheduled vCPUs
> virt: gunyah: Add hypercalls for sending doorbell
> virt: gunyah: Add irqfd interface
> virt: gunyah: Add ioeventfd
> MAINTAINERS: Add Gunyah hypervisor drivers section
>
> .../bindings/firmware/gunyah-hypervisor.yaml | 82 ++
> .../userspace-api/ioctl/ioctl-number.rst | 1 +
> Documentation/virt/gunyah/index.rst | 114 +++
> Documentation/virt/gunyah/message-queue.rst | 71 ++
> Documentation/virt/gunyah/vm-manager.rst | 142 +++
> Documentation/virt/index.rst | 1 +
> MAINTAINERS | 13 +
> arch/arm64/Kbuild | 1 +
> arch/arm64/gunyah/Makefile | 3 +
> arch/arm64/gunyah/gunyah_hypercall.c | 140 +++
> arch/arm64/include/asm/gunyah.h | 24 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/gunyah-msgq.c | 210 ++++
> drivers/virt/Kconfig | 2 +
> drivers/virt/Makefile | 1 +
> drivers/virt/gunyah/Kconfig | 59 ++
> drivers/virt/gunyah/Makefile | 11 +
> drivers/virt/gunyah/gunyah_ioeventfd.c | 117 +++
> drivers/virt/gunyah/gunyah_irqfd.c | 167 ++++
> drivers/virt/gunyah/gunyah_platform_hooks.c | 80 ++
> drivers/virt/gunyah/gunyah_qcom.c | 147 +++
> drivers/virt/gunyah/gunyah_vcpu.c | 456 +++++++++
> drivers/virt/gunyah/rsc_mgr.c | 910 ++++++++++++++++++
> drivers/virt/gunyah/rsc_mgr.h | 19 +
> drivers/virt/gunyah/rsc_mgr_rpc.c | 500 ++++++++++
> drivers/virt/gunyah/vm_mgr.c | 792 +++++++++++++++
> drivers/virt/gunyah/vm_mgr.h | 70 ++
> drivers/virt/gunyah/vm_mgr_mm.c | 256 +++++
> include/linux/gunyah.h | 207 ++++
> include/linux/gunyah_rsc_mgr.h | 162 ++++
> include/linux/gunyah_vm_mgr.h | 124 +++
> include/uapi/linux/gunyah.h | 293 ++++++
> samples/Kconfig | 10 +
> samples/Makefile | 1 +
> samples/gunyah/.gitignore | 2 +
> samples/gunyah/Makefile | 6 +
> samples/gunyah/gunyah_vmm.c | 270 ++++++
> samples/gunyah/sample_vm.dts | 68 ++
> 38 files changed, 5534 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
> create mode 100644 Documentation/virt/gunyah/index.rst
> create mode 100644 Documentation/virt/gunyah/message-queue.rst
> create mode 100644 Documentation/virt/gunyah/vm-manager.rst
> create mode 100644 arch/arm64/gunyah/Makefile
> create mode 100644 arch/arm64/gunyah/gunyah_hypercall.c
> create mode 100644 arch/arm64/include/asm/gunyah.h
> create mode 100644 drivers/mailbox/gunyah-msgq.c
> create mode 100644 drivers/virt/gunyah/Kconfig
> create mode 100644 drivers/virt/gunyah/Makefile
> create mode 100644 drivers/virt/gunyah/gunyah_ioeventfd.c
> create mode 100644 drivers/virt/gunyah/gunyah_irqfd.c
> create mode 100644 drivers/virt/gunyah/gunyah_platform_hooks.c
> create mode 100644 drivers/virt/gunyah/gunyah_qcom.c
> create mode 100644 drivers/virt/gunyah/gunyah_vcpu.c
> create mode 100644 drivers/virt/gunyah/rsc_mgr.c
> create mode 100644 drivers/virt/gunyah/rsc_mgr.h
> create mode 100644 drivers/virt/gunyah/rsc_mgr_rpc.c
> create mode 100644 drivers/virt/gunyah/vm_mgr.c
> create mode 100644 drivers/virt/gunyah/vm_mgr.h
> create mode 100644 drivers/virt/gunyah/vm_mgr_mm.c
> create mode 100644 include/linux/gunyah.h
> create mode 100644 include/linux/gunyah_rsc_mgr.h
> create mode 100644 include/linux/gunyah_vm_mgr.h
> create mode 100644 include/uapi/linux/gunyah.h
> create mode 100644 samples/gunyah/.gitignore
> create mode 100644 samples/gunyah/Makefile
> create mode 100644 samples/gunyah/gunyah_vmm.c
> create mode 100644 samples/gunyah/sample_vm.dts
>
>
> base-commit: d71ee0d6ee72138dd4fda646a955a15286c46544

\
 
 \ /
  Last update: 2023-04-25 18:34    [W:0.167 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site