lkml.org 
[lkml]   [2023]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 0/6] drm: bridge: samsung-dsim: Support variable clocking
On Sun, Apr 23, 2023 at 8:12 PM Adam Ford <aford173@gmail.com> wrote:
>
> This series fixes the blanking pack size and the PMS calculation. It then
> adds support to allows the DSIM to dynamically DPHY clocks, and support
> non-burst mode while allowing the removal of the hard-coded clock values
> for the PLL for imx8m mini/nano/plus, and it allows the removal of the
> burst-clock device tree entry when burst-mode isn't supported by connected
> devices like an HDMI brige. In that event, the HS clock is set to the value
> requested by the bridge chip.
>
> This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should work
> on i.MX8M Mini as well.
>
>
> Adam Ford (5):
> drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
> drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
> drm: bridge: samsung-dsim: Dynamically configure DPHY timing
> drm: bridge: samsung-dsim: Support non-burst mode
> drm: bridge: samsung-dsim: Let blanking calcuation work in non-burst
> mode
>
> Lucas Stach (1):
> drm: bridge: samsung-dsim: fix blanking packet size calculation

This makes the micro-HDMI port on my Hummingboard Pulse (w/ i.MX8M Mini SOM)
work properly, so the whole series is

Tested-by: Chen-Yu Tsai <wenst@chromium.org>

Thanks!

\
 
 \ /
  Last update: 2023-04-24 09:21    [W:0.357 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site