lkml.org 
[lkml]   [2023]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH V2 3/4] arm64: dts: qcom: ipq9574: Drop bias_pll_ubi_nc_clk & update intc node
    From


    On 17.04.2023 07:33, Devi Priya wrote:
    > Drop the unused backup source bias_pll_ubi_nc_clk.
    > Also, update the size of GICC and GICV region to 8kB and add target CPU
    > encoding.
    These things have too big and too distant consequences to go in
    a single patch and the GIC fix should have a fixes tag.

    >
    > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
    > ---
    > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 13 +++----------
    > 1 file changed, 3 insertions(+), 10 deletions(-)
    >
    > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
    > index 3bb7435f5e7f..f1f959b43180 100644
    > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
    > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
    > @@ -16,12 +16,6 @@
    > #size-cells = <2>;
    >
    > clocks {
    > - bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
    > - compatible = "fixed-clock";
    > - clock-frequency = <353000000>;
    > - #clock-cells = <0>;
    > - };
    > -
    > sleep_clk: sleep-clk {
    > compatible = "fixed-clock";
    > #clock-cells = <0>;
    > @@ -131,7 +125,6 @@
    > reg = <0x01800000 0x80000>;
    > clocks = <&xo_board_clk>,
    > <&sleep_clk>,
    > - <&bias_pll_ubi_nc_clk>,
    NAK, this is an ABI break. If you want to drop it, you'd need
    to leave a <0> here.

    Konrad
    > <0>,
    > <0>,
    > <0>,
    > @@ -172,14 +165,14 @@
    > intc: interrupt-controller@b000000 {
    > compatible = "qcom,msm-qgic2";
    > reg = <0x0b000000 0x1000>, /* GICD */
    > - <0x0b002000 0x1000>, /* GICC */
    > + <0x0b002000 0x2000>, /* GICC */
    > <0x0b001000 0x1000>, /* GICH */
    > - <0x0b004000 0x1000>; /* GICV */
    > + <0x0b004000 0x2000>; /* GICV */
    > #address-cells = <1>;
    > #size-cells = <1>;
    > interrupt-controller;
    > #interrupt-cells = <3>;
    > - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
    > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
    > ranges = <0 0x0b00c000 0x3000>;
    >
    > v2m0: v2m@0 {

    \
     
     \ /
      Last update: 2023-04-19 12:55    [W:3.239 / U:1.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site