lkml.org 
[lkml]   [2023]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V3 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
From


On 4/14/2023 5:04 PM, Srinivas Kandagatla wrote:
>
>
> On 13/04/2023 10:28, Souradeep Chowdhury wrote:
>> All of Qualcomm's proprietary Android boot-loaders capture boot time
>> stats, like the time when the bootloader started execution and at what
>> point the bootloader handed over control to the kernel etc. in the IMEM
>> region. This information is captured in a specific format by this driver
>> by mapping a structure to the IMEM memory region and then accessing the
>> members of the structure to show the information within debugfs file.
>> This information is useful in verifying if the existing boot KPIs have
>> regressed or not. The information is shown in milliseconds, a sample
>> log from sm8450(waipio) device is as follows:-
>>
>> /sys/kernel/debug/146aa6b0.boot_stats # cat abl_time
>> 17898 ms
>> /sys/kernel/debug/146aa6b0.boot_stats # cat pre_abl_time
>> 2879 ms
>>
>> The Module Power Manager(MPM) sleep counter starts ticking at the PBL
>> stage and the timestamp generated by the sleep counter is logged by
>> the Qualcomm proprietary bootloader(ABL) at two points-> First when it
>> starts execution which is logged here as "pre_abl_time" and the second
>> when it is about to load the kernel logged as "abl_time". Documentation
>> details are also added in
>> Documentation/ABI/testing/debugfs-driver-bootstat
>>
>> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
>> ---
>>   Documentation/ABI/testing/debugfs-driver-bootstat |  17 ++++
>>   drivers/soc/qcom/Kconfig                          |   9 ++
>>   drivers/soc/qcom/Makefile                         |   1 +
>>   drivers/soc/qcom/boot_stats.c                     | 109
>> ++++++++++++++++++++++
>>   4 files changed, 136 insertions(+)
>>   create mode 100644 Documentation/ABI/testing/debugfs-driver-bootstat
>>   create mode 100644 drivers/soc/qcom/boot_stats.c
>>
>> diff --git a/Documentation/ABI/testing/debugfs-driver-bootstat
>> b/Documentation/ABI/testing/debugfs-driver-bootstat
>> new file mode 100644
>> index 0000000..37d8e32
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/debugfs-driver-bootstat
>> @@ -0,0 +1,17 @@
>> +What:        /sys/kernel/debug/...stats/pre_abl_time
>> +Date:           April 2023
>> +Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
>> +Description:
>> +        This file is used to read the KPI value pre abl time.
>> +        It shows the time in milliseconds from the starting
>> +        point of PBL to the point when the control shifted
>> +        to ABL(Qualcomm proprietary bootloader).
>> +
>> +What:           /sys/kernel/debug/...stats/abl_time
>> +Date:           April 2023
>> +Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
>> +Description:
>> +        This file is used to read the KPI value abl time.
>> +        It show the duration in milliseconds from the
>> +        time control switched to ABL to the point when
>> +        the linux kernel started getting loaded.
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index a8f2830..0d2cbd3 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -16,6 +16,15 @@ config QCOM_AOSS_QMP
>>         subsystems as well as controlling the debug clocks exposed by
>> the Always On
>>         Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP).
>>
>> +config QCOM_BOOTSTAT
>> +    tristate "Qualcomm Technologies, Boot Stat driver"
>> +    depends on ARCH_QCOM || COMPILE_TEST
>> +    help
>> +      This option enables driver support for boot stats. Boot stat
>> driver logs
>> +      the kernel bootloader information by accessing the imem region.
>> These
>> +      information is exposed in the form of debugfs files. This is
>> used to
>> +      determine if there is any regression in boot timings.
>> +
>>   config QCOM_COMMAND_DB
>>       tristate "Qualcomm Command DB"
>>       depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index 6e88da8..bdaa41a 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -1,6 +1,7 @@
>>   # SPDX-License-Identifier: GPL-2.0
>>   CFLAGS_rpmh-rsc.o := -I$(src)
>>   obj-$(CONFIG_QCOM_AOSS_QMP) +=    qcom_aoss.o
>> +obj-$(CONFIG_QCOM_BOOTSTAT) += boot_stats.o
>>   obj-$(CONFIG_QCOM_GENI_SE) +=    qcom-geni-se.o
>>   obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
>>   obj-$(CONFIG_QCOM_CPR)        += cpr.o
>> diff --git a/drivers/soc/qcom/boot_stats.c
>> b/drivers/soc/qcom/boot_stats.c
>> new file mode 100644
>> index 0000000..9b65aa1
>> --- /dev/null
>> +++ b/drivers/soc/qcom/boot_stats.c
>> @@ -0,0 +1,109 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2013-2019, 2021 The Linux Foundation. All rights
>> reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +
>> +#define TO_MS(timestamp) ((timestamp * 1000) / 32768)
>> +
>> +/**
>> + *  struct boot_stats - timestamp information related to boot stats
>> + *  @abl_start: Time for the starting point of the abl
>> + *  @abl_end: Time when the kernel starts loading from abl
>> + */
>> +struct boot_stats {
>> +    u32 abl_start;
>> +    u32 abl_end;
>> +} __packed;
>> +
>> +static struct boot_stats __iomem *boot_stats;
>> +static struct dentry *dbg_dir;
>> +
> I would avoid global variables where possible, and allocate them
> dynamically.
>
> In this case you could do that in probe and pass it(boot_stats) as
> argument to debugfs_create_file() and also set dbg_dir as
> dev_set_drvdata to be able to use it in remove.

Ack

>
>
> ----------------->cut<--------------
>> +static ssize_t abl_read(struct file *filp, char __user *userbuf,
>> +            size_t count, loff_t *ppos)
>> +{
>> +    char buf[20];
>> +
>> +    u32 abl_time = TO_MS(boot_stats->abl_end) -
>> TO_MS(boot_stats->abl_start);
>> +
>> +    sprintf(buf, "%u ms\n", abl_time);
>> +    return simple_read_from_buffer(userbuf, count, ppos, buf,
>> strlen(buf));
>> +}
>> +
>> +static const struct file_operations abl_fops = {
>> +    .read = abl_read,
>> +    .open = simple_open,
>> +    .llseek = generic_file_llseek,
>> +};
>> +
> --------------->cut<----------------
> can be replaced with.
>
> static int abl_show(struct seq_file *s_file, void *data)
> {
>         struct boot_stats *boot_stats = s_file->private;
>     ...
> }
>
> DEFINE_SHOW_ATTRIBUTE(abl);

Ack

>
>> +static ssize_t pre_abl_read(struct file *filp, char __user *userbuf,
>> +                size_t count, loff_t *ppos)
>> +{
>> +    char buf[20];
>> +
>> +    sprintf(buf, "%u ms\n", TO_MS(boot_stats->abl_start));
>> +    return simple_read_from_buffer(userbuf, count, ppos, buf,
>> strlen(buf));
>> +}
>> +
>> +static const struct file_operations pre_abl_fops = {
>> +    .read = pre_abl_read,
>> +    .open = simple_open,
>> +    .llseek = generic_file_llseek,
>> +};
>> +
> same here.

Ack

>
>> +static int boot_stats_probe(struct platform_device *pdev)
>> +{
>> +    struct device *boot_stat = &pdev->dev;
>> +
>> +    dbg_dir = debugfs_create_dir(dev_name(&pdev->dev), NULL);
>> +    if (IS_ERR(dbg_dir))
>> +        return dev_err_probe(&pdev->dev, -ENOENT,
>> +                     "failed to create debugfs directory");
>> +
>> +    boot_stats = of_iomap(boot_stat->of_node, 0);
>
> may be devm_of_iomap?

Ack

>
>> +    if (!boot_stats)
>> +        return dev_err_probe(&pdev->dev, -ENOMEM,
>> +                "failed to map imem region\n");
>> +
>> +    debugfs_create_file("pre_abl_time", 0200, dbg_dir, NULL,
>> &pre_abl_fops);
>> +    debugfs_create_file("abl_time", 0200, dbg_dir, NULL, &abl_fops);
>> +
>> +    return 0;
>> +}
>> +
>> +static int boot_stats_remove(struct platform_device *pdev)
>> +{
>> +    debugfs_remove_recursive(dbg_dir);
>> +    iounmap(boot_stats);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct of_device_id boot_stats_dt_match[] = {
>> +    { .compatible = "qcom,sm8450-bootstats" },
>> +    { }
>> +};
>> +MODULE_DEVICE_TABLE(of, boot_stats_dt_match);
>> +
>> +static struct platform_driver boot_stat_driver = {
>> +    .probe  = boot_stats_probe,
>> +    .remove = boot_stats_remove,
>
> consider using remove_new as its suggested that new drivers implement
> .remove_new as it returns void.
> more details in  include/linux/platform_device.h

Ack

>
>
> -srini
>
>> +    .driver = {
>> +        .name = "qcom-boot-stats",
>> +        .of_match_table = boot_stats_dt_match,
>> +    },
>> +};
>> +module_platform_driver(boot_stat_driver);
>> +
>> +MODULE_DESCRIPTION("Qualcomm Technologies Inc. Boot Stat driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.7.4
>>

\
 
 \ /
  Last update: 2023-04-14 14:25    [W:0.047 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site