Messages in this thread | | | Date | Fri, 14 Apr 2023 10:11:06 +0530 | Subject | Re: [PATCH v6 0/8] Add multiport support for DWC3 controllers | From | Krishna Kurapati PSSNV <> |
| |
On 4/14/2023 12:24 AM, Adrien Thierry wrote: > Hi, > >> Krishna Kurapati (8): >> dt-bindings: usb: Add bindings for multiport properties on DWC3 >> controller >> usb: dwc3: core: Access XHCI address space temporarily to read port >> info >> usb: dwc3: core: Skip setting event buffers for host only controllers >> usb: dwc3: core: Refactor PHY logic to support Multiport Controller >> usb: dwc3: qcom: Add multiport controller support for qcom wrapper >> arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 >> arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB >> ports >> arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb >> controller >> >> .../devicetree/bindings/usb/snps,dwc3.yaml | 13 +- >> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 47 +++ >> arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++ >> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 58 +++ >> drivers/usb/dwc3/core.c | 373 ++++++++++++++---- >> drivers/usb/dwc3/core.h | 71 +++- >> drivers/usb/dwc3/drd.c | 13 +- >> drivers/usb/dwc3/dwc3-qcom.c | 28 +- >> 8 files changed, 523 insertions(+), 102 deletions(-) > > I tested this series on the sa8540p-ride, with a USB Ethernet adapter > plugged into the board. The device shows up as expected: > > # lsusb -tv > /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 10000M > ID 1d6b:0003 Linux Foundation 3.0 root hub > |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M > ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter > /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/4p, 480M > ID 1d6b:0002 Linux Foundation 2.0 root hub > > Tested-by: Adrien Thierry <athierry@redhat.com> # sa8540p-ride >
Hi Adrien,
Thanks for testing out the patches.
Regards, Krishna,
| |