lkml.org 
[lkml]   [2023]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Re: [PATCH net] wwan: core: add print for wwan port attach/disconnect
On Thu, 13 Apr 2023 at 09:26, Slark Xiao <slark_xiao@163.com> wrote:
>
> At 2023-04-13 15:07:21, "Loic Poulain" <loic.poulain@linaro.org> wrote:
> >On Wed, 12 Apr 2023 at 13:45, Slark Xiao <slark_xiao@163.com> wrote:
> >>
> >> Refer to USB serial device or net device, there is notice to
> >> let end user know the status of device, like attached or
> >> disconnected. Add attach/disconnect print for wwan device as
> >> well. This change works for MHI device and USB device.
> >
> >This change works for wwan port devices, whatever the bus is.
> >
> Sure. Since wwan support USB device as well after integrating
> WWAN framework into cdc-wdm.
> >>
> >> Signed-off-by: Slark Xiao <slark_xiao@163.com>
> >> ---
> >> drivers/net/wwan/wwan_core.c | 5 +++++
> >> 1 file changed, 5 insertions(+)
> >>
> >> diff --git a/drivers/net/wwan/wwan_core.c b/drivers/net/wwan/wwan_core.c
> >> index 2e1c01cf00a9..d3ac6c5b0b26 100644
> >> --- a/drivers/net/wwan/wwan_core.c
> >> +++ b/drivers/net/wwan/wwan_core.c
> >> @@ -492,6 +492,8 @@ struct wwan_port *wwan_create_port(struct device *parent,
> >> if (err)
> >> goto error_put_device;
> >>
> >> + dev_info(&wwandev->dev, "%s converter now attached to %s\n",
> >> + wwan_port_dev_type.name, port->dev.kobj.name);
> >
> >You should use `dev_name()` instead of direct reference to kobj.
> >
> Will update this in v2.
> >Why 'converter' ? If you really want to print, it should be something like:
> >wwan0: wwan0at1 port attached
> This refer to USB device attached info:
> 696.444511] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0
> [ 696.444877] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1
> [ 696.445065] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2
> currently, we will print it as below with above patch:
> [ 233.192123] wwan wwan0: wwan_port converter now attached to wwan0mbim0
> [ 694.530781] wwan wwan0: wwan_port converter now disconnected from wwan0mbim0

Ok, but we don't have to mimic USB, and it's not a converter, keep
that simple (e.g. 'port %s attached').

Regards,
Loic

\
 
 \ /
  Last update: 2023-04-13 19:13    [W:0.026 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site