lkml.org 
[lkml]   [2023]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information
Date
Using interrupts-extended already indicates what the interrupt-parent
is, so drop the explicit interrupt-parent.

The comment about this being the phy-intr is not helpful either, since
this is the only interrupt in the phy node.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
* New patch (Konrad)

arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ac52a8dfeba1..b65e0203d783 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -361,8 +361,7 @@ rgmii_phy: phy@7 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x7>;

- interrupt-parent = <&tlmm>;
- interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
+ interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
device_type = "ethernet-phy";
};
};
--
2.39.2
\
 
 \ /
  Last update: 2023-04-13 21:42    [W:0.040 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site