lkml.org 
[lkml]   [2023]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] usb: dwc2: improve error handling in __dwc2_lowlevel_hw_enable
Date
Add error handling in __dwc2_lowlevel_hw_enable() that may leave the
clocks and regulators enabled upon error.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
drivers/usb/dwc2/platform.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index d1589ba7d322..c431ce6c119f 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -104,7 +104,7 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
- return ret;
+ goto err_dis_reg;
}

if (hsotg->uphy) {
@@ -113,10 +113,25 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
} else {
ret = phy_init(hsotg->phy);
- if (ret == 0)
+ if (ret == 0) {
ret = phy_power_on(hsotg->phy);
+ if (ret)
+ phy_exit(hsotg->phy);
+ }
}

+ if (ret)
+ goto err_dis_clk;
+
+ return 0;
+
+err_dis_clk:
+ if (hsotg->clk)
+ clk_disable_unprepare(hsotg->clk);
+
+err_dis_reg:
+ regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
+
return ret;
}

--
2.25.1
\
 
 \ /
  Last update: 2023-04-12 17:21    [W:0.242 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site