lkml.org 
[lkml]   [2023]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net v2] net: dsa: mv88e6xxx: Reset mv88e6393x force WD event bit
On Fri, Mar 31, 2023 at 10:40:13AM +0200, Gustav Ekelund wrote:
> From: Gustav Ekelund <gustaek@axis.com>
>
> The force watchdog event bit is not cleared during SW reset in the
> mv88e6393x switch. This is a different behavior compared to mv886390 which
> clears the force WD event bit as advertised. This causes a force WD event
> to be handled over and over again as the SW reset following the event never
> clears the force WD event bit.
>
> Explicitly clear the watchdog event register to 0 in irq_action when
> handling an event to prevent the switch from sending continuous interrupts.
> Marvell aren't aware of any other stuck bits apart from the force WD
> bit.
>
> Signed-off-by: Gustav Ekelund <gustaek@axis.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2023-03-31 14:28    [W:0.037 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site