lkml.org 
[lkml]   [2023]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v5 2/3] net: stmmac: check if MAC needs to attach to a PHY
Date
After the introduction of the fixed-link support, the MAC driver
no longer attempt to scan for a PHY to attach to. This causes the
non fixed-link setups to stop working.

Using the phylink_expects_phy() to check and determine if the MAC
should expect and attach a PHY.

Fixes: ab21cf920928 ("net: stmmac: make mdio register skips PHY scanning for fixed-link")
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Lai Peter Jun Ann <peter.jun.ann.lai@intel.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8f543c3ab5c5..41f0f3b74933 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1135,6 +1135,7 @@ static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct fwnode_handle *fwnode;
+ bool phy_needed;
int ret;

fwnode = of_fwnode_handle(priv->plat->phylink_node);
@@ -1144,10 +1145,11 @@ static int stmmac_init_phy(struct net_device *dev)
if (fwnode)
ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);

+ phy_needed = phylink_expects_phy(priv->phylink);
/* Some DT bindings do not set-up the PHY handle. Let's try to
* manually parse it
*/
- if (!fwnode || ret) {
+ if (!fwnode || phy_needed || ret) {
int addr = priv->plat->phy_addr;
struct phy_device *phydev;

--
2.34.1
\
 
 \ /
  Last update: 2023-03-30 11:16    [W:2.423 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site