lkml.org 
[lkml]   [2023]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 5/5] ARM: dts: qcom: sdx65-mtp: Enable PCIe EP
From


On 17.03.2023 07:53, Rohit Agarwal wrote:
> Enable PCIe Endpoint controller on the SDX65 MTP board based
> on Qualcomm SDX65 platform.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 70720e6..afe970a 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -245,6 +245,17 @@
> status = "okay";
> };
>
> +&pcie_ep {
> + pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
> + &pcie_ep_wake_default>;
This seems misaligned, the &s should be one below another

But other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> + pinctrl-names = "default";
> +
> + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
> +
> + status = "okay";
> +};
> +
> &pcie_phy {
> vdda-phy-supply = <&vreg_l1b_1p2>;
> vdda-pll-supply = <&vreg_l4b_0p88>;
> @@ -277,6 +288,29 @@
> status = "okay";
> };
>
> +&tlmm {
> + pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
> + pins = "gpio56";
> + function = "pcie_clkreq";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + pcie_ep_perst_default: pcie-ep-perst-default-state {
> + pins = "gpio57";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + pcie_ep_wake_default: pcie-ep-wake-default-state {
> + pins = "gpio53";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> &usb {
> status = "okay";
> };

\
 
 \ /
  Last update: 2023-03-28 15:33    [W:0.101 / U:2.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site