lkml.org 
[lkml]   [2023]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/5] usb: dwc3: qcom: Clear pending interrupt before enabling wake interrupt
On Tue, Mar 28, 2023 at 11:28:32AM +0200, Johan Hovold wrote:
> On Sat, Mar 25, 2023 at 10:22:16PM +0530, Manivannan Sadhasivam wrote:
> > It is possible that there may be a pending interrupt logged into the dwc IP
> > while the interrupts were disabled in the driver. And when the wakeup
> > interrupt is enabled, the pending interrupt might fire which is not
> > required to be serviced by the driver.
> >
> > So always clear the pending interrupt before enabling wake interrupt.
> >
> > Cc: stable@vger.kernel.org # 5.20
> > Fixes: 360e8230516d ("usb: dwc3: qcom: Add helper functions to enable,disable wake irqs")
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > drivers/usb/dwc3/dwc3-qcom.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> > index bbf67f705d0d..f1059dfcb0e8 100644
> > --- a/drivers/usb/dwc3/dwc3-qcom.c
> > +++ b/drivers/usb/dwc3/dwc3-qcom.c
> > @@ -346,6 +346,8 @@ static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity)
> > if (!irq)
> > return;
> >
> > + irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, 0);
> > +
>
> This looks like a hack (and a layering violation). Note that there are
> no other non-irqchip drivers calling this function.
>

I can check if this can be achieved by clearing some dwc specific registers.

- Mani

> > if (polarity)
> > irq_set_irq_type(irq, polarity);
>
> Johan

--
மணிவண்ணன் சதாசிவம்

\
 
 \ /
  Last update: 2023-03-28 11:52    [W:0.086 / U:2.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site