lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/1] ASoC: wm8903: implement DMIC support
пн, 27 бер. 2023 р. о 13:14 Charles Keepax <ckeepax@opensource.cirrus.com> пише:
>
> On Mon, Mar 27, 2023 at 11:37:05AM +0300, Svyatoslav Ryhel wrote:
> > пн, 27 бер. 2023 р. о 11:32 Charles Keepax <ckeepax@opensource.cirrus.com> пише:
> > >
> > > On Sat, Mar 25, 2023 at 10:36:43AM +0200, Svyatoslav Ryhel wrote:
> > > > Add DMIC input and routing.
> > > >
> > > > Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # ASUS TF300T
> > > > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > > ---
> > > > sound/soc/codecs/wm8903.c | 5 ++++-
> > > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
> > > > index 41346e5ec5ad..9c2f0aadcff3 100644
> > > > --- a/sound/soc/codecs/wm8903.c
> > > > +++ b/sound/soc/codecs/wm8903.c
> > > > @@ -9,7 +9,6 @@
> > > > *
> > > > * TODO:
> > > > * - TDM mode configuration.
> > > > - * - Digital microphone support.
> > > > */
> > > >
> > > > #include <linux/module.h>
> > > > @@ -816,6 +815,7 @@ SND_SOC_DAPM_INPUT("IN2L"),
> > > > SND_SOC_DAPM_INPUT("IN2R"),
> > > > SND_SOC_DAPM_INPUT("IN3L"),
> > > > SND_SOC_DAPM_INPUT("IN3R"),
> > > > +SND_SOC_DAPM_INPUT("DMIC"),
> > > > SND_SOC_DAPM_INPUT("DMICDAT"),
> > >
> > > There is already a datapath for the DMIC here, DMICDAT. Are you
> > > sure you don't just need to set the "Left/Right ADC Input" muxes
> > > correctly through the ALSA controls?
> > >
> >
> > I will check once more, but so far I was not able to set the mic to
> > work with DMICDAT. Only with this patch.
> >
>
> The two should be basically equivalent when the controls are set
> right, your patch has:
>
> DMIC -> ADCL
>
> The current code has
>
> DMIC -> Left ADC Input -> ADCL
>
> The only difference is that Left ADC Input sets the ADC_DIG_MIC
> bit, but the datasheet clearly indicates that should be
> necessary for digital mics to work. Does your system definitely
> have DMICs? Without that bit set the decimator should still be
> connected to the analogue front end.
>

You are correct, this patch is not needed. It appears that the
issue was not in routing but in wm8903 gpio configuration.

DMICDAT works as intended.

> Thanks,
> Charles

\
 
 \ /
  Last update: 2023-03-27 16:49    [W:0.048 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site