lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V3 7/7] arm64: dts: imx8mp: add interconnect for hsio blk ctrl
Date
Hi Greg,

Am Montag, 27. März 2023, 06:50:37 CEST schrieb Greg Ungerer:
> On 2/3/22 17:13, Peng Fan wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Add interconnect property for hsio blk ctrl
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> > 08bd57742294..9cceeeeb26be 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1109,6 +1109,11 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
> >
> > <&pgc_hsiomix>,
<&pgc_pcie_phy>;
> >
> > power-domain-names = "bus", "usb",
"usb-phy1",
> >
> > "usb-phy2",
"pcie", "pcie-phy";
> >
> > + interconnects = <&noc
IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
> > + <&noc
IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
> > + <&noc
IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
> > + <&noc
IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
> > + interconnect-names = "noc-pcie",
"usb1", "usb2", "pcie";
> >
> > #power-domain-cells = <1>;
> >
> > };
> >
> > };
>
> This change completely breaks USB for me on a new iMX8mp platform I am
> working with. Before this change normal USB probe looks good:
>
> xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
> xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks
> 0x0000000000010010 xhci-hcd xhci-hcd.0.auto: irq 206, io mem 0x38100000
> xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
> xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
> bcdDevice= 6.03 usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1 usb usb1: Product: xHCI Host Controller
> usb usb1: Manufacturer: Linux 6.3.0-rc4-dirty xhci-hcd
> ....
>
> But after this commit is applied, no USB probe messages at all.
>
> USB worked fine in 6.0 for me, but when I switched up to 6.1 USB was broken,
> I bisected to this as being the offending commit. This is still broken for
> me in todays 6.3-rc4. If I revert this change (and only this change) USB
> works again.
>
> Any thoughts on why this breaks USB?

Maybe you are missing CONFIG_INTERCONNECT_IMX8MP?

Best regards,
Alexander

--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/


\
 
 \ /
  Last update: 2023-03-27 08:27    [W:0.097 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site