lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/2] mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min
From


On 3/27/23 11:43, Miquel Raynal wrote:
> Hi Tudor,
>
> tudor.ambarus@linaro.org wrote on Mon, 27 Mar 2023 11:30:51 +0100:
>
>> On 3/27/23 10:47, Christophe Kerello wrote:
>>> This patch is using timings.mode value instead of checking tRC_min timing
>>> for EDO mode support.
>>>
>>
>> Fixes and Cc to stable here too, as you'd like to have this backported
>> as well, don't you?
>
> Actually the reason why Christophe split this into two patches is
> because timings.mode was introduced rather lately, he wanted the same
> patch to apply on all stable kernels, he actually asked for that split
> and I agreed (another solution would have been to send this current
> patch to Linus and have the other version sent to stable, but it
> requires a bit of scheduling on both ends).
>
> Link: https://lore.kernel.org/linux-mtd/20230327101156.0ec2816a@xps-13/T/#t

Right, I understood that from the beginning. If it were to me, I would
Cc: stable@vger.kernel.org #v5.4+ for the first patch and
Cc: stable@vger.kernel.org #v5.10+ for the second.

So first would be alone just in v5.4, and starting with v5.10 we'll have
both and we'll mimic what we currently have in upstream mainline.

>
>>
>>> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
>>
>> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>
>>> ---
>>> drivers/mtd/nand/raw/stm32_fmc2_nand.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> index 3abb63d00a0b..9e74bcd90aaa 100644
>>> --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
>>> @@ -1531,7 +1531,7 @@ static int stm32_fmc2_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>>> if (IS_ERR(sdrt))
>>> return PTR_ERR(sdrt);
>>>
>>> - if (sdrt->tRC_min < 30000)
>>> + if (conf->timings.mode > 3)
>>> return -EOPNOTSUPP;
>>>
>>> if (chipnr == NAND_DATA_IFACE_CHECK_ONLY)
>
>
> Thanks,
> Miquèl

\
 
 \ /
  Last update: 2023-03-27 13:07    [W:0.123 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site