lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v9 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings
Date

On Mon, 27 Mar 2023 22:16:27 +0200, Dario Binacchi wrote:
> Add documentation of device tree bindings for the STM32 basic extended
> CAN (bxcan) controller.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
> ---
>
> Changes in v9:
> - Replace master/slave terms with primary/secondary.
>
> Changes in v5:
> - Add Rob Herring's Reviewed-by tag.
>
> Changes in v4:
> - Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
> (compatible "st,stm32f4-bxcan") are no longer children of a parent
> node with compatible "st,stm32f4-bxcan-core".
> - Add the "st,gcan" property (global can memory) to can nodes which
> references a "syscon" node containing the shared clock and memory
> addresses.
>
> Changes in v3:
> - Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
> - Add description to the parent of the two child nodes.
> - Move "patterProperties:" after "properties: in top level before "required".
> - Add "clocks" to the "required:" list of the child nodes.
>
> Changes in v2:
> - Change the file name into 'st,stm32-bxcan-core.yaml'.
> - Rename compatibles:
> - st,stm32-bxcan-core -> st,stm32f4-bxcan-core
> - st,stm32-bxcan -> st,stm32f4-bxcan
> - Rename master property to st,can-master.
> - Remove the status property from the example.
> - Put the node child properties as required.
>
> .../bindings/net/can/st,stm32-bxcan.yaml | 85 +++++++++++++++++++
> 1 file changed, 85 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: [error] syntax error: mapping values are not allowed here (syntax)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/net/can/st,stm32-bxcan.example.dts'
Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: mapping values are not allowed here
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/can/st,stm32-bxcan.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml:27:11: mapping values are not allowed here
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230327201630.3874028-3-dario.binacchi@amarulasolutions.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

\
 
 \ /
  Last update: 2023-03-28 03:55    [W:0.104 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site