lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/4] Add LVTS support for mt8192
On Sat, Mar 25, 2023 at 5:33 AM Chen-Yu Tsai <wenst@chromium.org> wrote:
>
> On Wed, Mar 22, 2023 at 8:48 PM Balsam CHIHI <bchihi@baylibre.com> wrote:
> >
> > Hi Chen-Yu,
> >
> > I suspect the bug comes from incorrect calibration data offsets for AP
> > Domain because you confirm that MCU Domain probe runs without issues.
> > Is it possible to test something for us to confirm this theory (i
> > don't have an mt8192 board on hand now), when you have the time of
> > course?
> > We would like to test AP Domain's calibration data offsets with a
> > working one, for example :
> >
> > static const struct lvts_ctrl_data mt8192_lvts_ap_data_ctrl[] = {
> > {
> > - .cal_offset = { 0x25, 0x28 },
> > + .cal_offset = { 0x04, 0x04 },
> > .lvts_sensor = {
> > { .dt_id = MT8192_AP_VPU0 },
> > { .dt_id = MT8192_AP_VPU1 }
> > @@ -1336,7 +1336,7 @@ static const struct lvts_ctrl_data
> > mt8192_lvts_ap_data_ctrl[] = {
> > .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
> > },
> > {
> > - .cal_offset = { 0x2e, 0x31 },
> > + .cal_offset = { 0x04, 0x04 },
> > .lvts_sensor = {
> > { .dt_id = MT8192_AP_GPU0 },
> > { .dt_id = MT8192_AP_GPU1 }
> > @@ -1346,7 +1346,7 @@ static const struct lvts_ctrl_data
> > mt8192_lvts_ap_data_ctrl[] = {
> > .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
> > },
> > {
> > - .cal_offset = { 0x37, 0x3a },
> > + .cal_offset = { 0x04, 0x04 },
> > .lvts_sensor = {
> > { .dt_id = MT8192_AP_INFRA },
> > { .dt_id = MT8192_AP_CAM },
> > @@ -1356,7 +1356,7 @@ static const struct lvts_ctrl_data
> > mt8192_lvts_ap_data_ctrl[] = {
> > .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8192,
> > },
> > {
> > - .cal_offset = { 0x40, 0x43, 0x46 },
> > + .cal_offset = { 0x04, 0x04, 0x04 },
> > .lvts_sensor = {
> > { .dt_id = MT8192_AP_MD0 },
> > { .dt_id = MT8192_AP_MD1 },
> >
> > This example is tested and works for mt8195,
> > (all sensors use the same calibration data offset for testing purposes).
> >
> > Thank you in advance for your help.
>
> The MCU ones are still tripping though. If I change all of them to 0x04,
> then nothing trips. There's also a bug in the interrupt handling code
> that needs to be dealt with.
>
> AFAICT the calibration data is stored differently. If you look at ChromeOS's
> downstream v5.10 driver, you'll see mt6873_efuse_to_cal_data() for MT8192,
> and mt8195_efuse_to_cal_data() for MT8195. The difference sums up to:
> MT8195 has all data sequentially stored, while MT8192 has most data stored
> in lower 24 bits of each 32-bit word, and the highest 8 bits are then used
> to pack data for the remaining sensors.
>
> Regards
> ChenYu

Hi Chen-Yu Tsai,

Thank you very much for helping me testing this suggestion.

Indeed, calibration data is stored differently in the mt8192 compared to mt8195.
So, the mt8192's support will be delayed for now, to allow further debugging.

In the mean time, we will only continue to upstream the remaining
mt8195's source code, so it will get full LVTS support.
A new series will be submitted soon.

Would you please point me out to the bug in interrupt handling code?

Best regards,
Balsam

\
 
 \ /
  Last update: 2023-03-28 02:22    [W:0.106 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site