lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dt-bindings: usb: typec-tcpci: convert to DT schema format
From
On 23/03/2023 07:58, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Convert the binding to DT schema format. The default speed is HS,
> so add a dummy port@0 in the example.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>
> V1:
> The default speed is HS, so port@0 is not added for some device tree,
> however the usb-c-connector requires port@0. Not sure we should drop
> the required port@0 from usb-c-connector schema or add a dummy port@0
> for tcpci as what this patch does.

imx8mq-librem5-devkit has full port@0 so just use similar approach.

>
> .../devicetree/bindings/usb/typec-tcpci.txt | 49 ------------
> .../devicetree/bindings/usb/typec-tcpci.yaml | 80 +++++++++++++++++++
> 2 files changed, 80 insertions(+), 49 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.txt
> create mode 100644 Documentation/devicetree/bindings/usb/typec-tcpci.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> deleted file mode 100644
> index 2082522b1c32..000000000000
> --- a/Documentation/devicetree/bindings/usb/typec-tcpci.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -TCPCI(Typec port cotroller interface) binding
> ----------------------------------------------
> -
> -Required properties:
> -- compatible: should be set one of following:
> - - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
> -
> -- reg: the i2c slave address of typec port controller device.
> -- interrupt-parent: the phandle to the interrupt controller which provides
> - the interrupt.
> -- interrupts: interrupt specification for tcpci alert.
> -
> -Required sub-node:
> -- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
> - of connector node are specified in
> - Documentation/devicetree/bindings/connector/usb-connector.yaml
> -
> -Example:
> -
> -ptn5110@50 {
> - compatible = "nxp,ptn5110";
> - reg = <0x50>;
> - interrupt-parent = <&gpio3>;
> - interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> -
> - usb_con: connector {
> - compatible = "usb-c-connector";
> - label = "USB-C";
> - data-role = "dual";
> - power-role = "dual";
> - try-power-role = "sink";
> - source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
> - sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
> - PDO_VAR(5000, 12000, 2000)>;
> - op-sink-microwatt = <10000000>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@1 {
> - reg = <1>;
> - usb_con_ss: endpoint {
> - remote-endpoint = <&usb3_data_ss>;
> - };
> - };
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.yaml b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml
> new file mode 100644
> index 000000000000..067d3b032e3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/typec-tcpci.yaml

Is this a binding for PTN5110 or for generic tcpci? Looks like the
first, thus name should be rather device specific, so nxp,ptn5110.
Specially that there are other tcpci chips in separate bindings.

> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/typec-tcpci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TCPCI(Typec port cotroller interface)

Also title should be changed to device specific.

> +
> +maintainers:
> + - Li Jun <jun.li@nxp.com>
> +
> +properties:
> + compatible:
> + const: nxp,ptn5110
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + port:
> + description: This port is used for usb role switch.
> + $ref: /schemas/graph.yaml#/properties/port

I don't think
> +
> + connector:
> + type: object
> + $ref: /schemas/connector/usb-connector.yaml#
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - connector
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/usb/pd.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ptn5110@50 {

tcpci or actually more popular: usb-typec

> + compatible = "nxp,ptn5110";
> + reg = <0x50>;
> + interrupt-parent = <&gpio3>;


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-03-27 09:43    [W:0.076 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site