lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/5] dts: arm64: qcom: sdm845: add SLPI FastRPC support
Date
Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through
an allocated memory region to load files from the host filesystem
such as sensor configuration files.

Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to
downstream, to allow userspace to communicate with the SLPI via the
FastRPC interface for initializing the sensors on the SLPI.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 3b547cb7aeb8..7412ea938765 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -878,6 +878,14 @@ mdata_mem: mpss-metadata {
size = <0 0x4000>;
no-map;
};
+
+ fastrpc_mem: fastrpc {
+ compatible = "shared-dma-pool";
+ reusable;
+ alloc-ranges = <0 0x00000000 0 0xffffffff>;
+ alignment = <0 0x400000>;
+ size = <0 0x1000000>;
+ };
};

adsp_pas: remoteproc-adsp {
@@ -3344,6 +3352,21 @@ glink-edge {
label = "dsps";
qcom,remote-pid = <3>;
mboxes = <&apss_shared 24>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "sdsp";
+ qcom,non-secure-domain;
+ qcom,vmids = <0x3 0xF 0x5 0x6>;
+ memory-region = <&fastrpc_mem>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb {
+ compatible = "qcom,fastrpc-compute-cb";
+ };
+ };
};
};

--
2.39.2
\
 
 \ /
  Last update: 2023-03-27 20:49    [W:0.058 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site