lkml.org 
[lkml]   [2023]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] net: dsa: b53: mdio: add support for BCM53134
El jue, 23 mar 2023 a las 20:58, Paul Geurts
(<paul.geurts@prodrive-technologies.com>) escribió:
>
> > -----Original Message-----
> > From: Álvaro Fernández Rojas <noltari@gmail.com>
> > Sent: donderdag 23 maart 2023 13:18
> > To: Paul Geurts <paul.geurts@prodrive-technologies.com>;
> > f.fainelli@gmail.com; jonas.gorski@gmail.com; andrew@lunn.ch;
> > olteanv@gmail.com; davem@davemloft.net; edumazet@google.com;
> > kuba@kernel.org; pabeni@redhat.com; robh+dt@kernel.org;
> > krzysztof.kozlowski+dt@linaro.org; netdev@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
> > Cc: Álvaro Fernández Rojas <noltari@gmail.com>
> > Subject: [PATCH 0/2] net: dsa: b53: mdio: add support for BCM53134
> >
> > This is based on the initial work from Paul Geurts that was sent to the
> > incorrect linux development lists and recipients.
> > I've modified it by removing BCM53134_DEVICE_ID from is531x5() and
> > therefore adding is53134() where needed.
> > I also added a separate RGMII handling block for is53134() since according to
> > Paul, BCM53134 doesn't support RGMII_CTRL_TIMING_SEL as opposed to
> > is531x5().
> >
> > Paul Geurts (1):
> > net: dsa: b53: mdio: add support for BCM53134
> >
> > Álvaro Fernández Rojas (1):
> > dt-bindings: net: dsa: b53: add BCM53134 support
> >
> > .../devicetree/bindings/net/dsa/brcm,b53.yaml | 1 +
> > drivers/net/dsa/b53/b53_common.c | 53 ++++++++++++++++++-
> > drivers/net/dsa/b53/b53_mdio.c | 5 +-
> > drivers/net/dsa/b53/b53_priv.h | 9 +++-
> > 4 files changed, 65 insertions(+), 3 deletions(-)
> >
> > --
> > 2.30.2
>
> Thank you for resending my patches! I didn't get to it yet. Any particular reason you didn't include the optional GPIO patch I had in my set?

I'm using it for a Sercomm H500-s which doesn't seem to need it.
However, I've just realized that it's documented here as GPIO 18:
https://openwrt.org/toh/sercomm/h500-s#other
Anyway, I think that the GPIO patch can be added later...

> ---
> Paul

--
Álvaro

\
 
 \ /
  Last update: 2023-03-27 01:15    [W:0.153 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site