lkml.org 
[lkml]   [2023]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH 00/14] Control Quad SPI pinctrl better on Qualcomm Chromebooks
    Date
    The main goal of this series is to do a better job of controling the
    pins related to the "Quad SPI" IP block on Qualcomm Chromebooks. This
    is essentially 'v2' of my previous attempt in the patch ("arm64: dts:
    qcom: sc7180: Fix trogdor qspi pull direction") [1] but since it's
    spiraled out a bit and there are no patches that are exactly the same
    I've reset to v1.

    The early patches in this series are just no-op cleanup patches that
    can be applied. They're not terribly critical but since they are
    "Fixes" I've listed them first.

    The next patch in the series is a very simple and (hopefully)
    non-controversial SPI patch. It can be applied independently if
    anything else.

    Next, we have a bunch of pinctrl patches (including the device tree
    bindings related to them). I dunno what folks are going to think about
    these. If everyone hates them, we can drop them and just change the
    later patches in the series to use "input-enable" instead of
    "output-disable". It feels ugly to me, but it maybe less upheval.

    Next I removed the now-deprecated "input-enable" property from all
    Chromebooks. None of them were necessary.

    Finally, I did what I really wanted to do in the first place: attempt
    to cleanup the pinctrl states of the Quad SPI. These patches have a
    hard requirement on the pinctrl change.

    [1] https://lore.kernel.org/r/20230213165743.1.I6f03f86546e6ce9abb1d24fd9ece663c3a5b950c@changeid


    Douglas Anderson (14):
    arm64: dts: sc7180: Rename qspi data12 as data23
    arm64: dts: sc7280: Rename qspi data12 as data23
    arm64: dts: sdm845: Rename qspi data12 as data23
    arm64: dts: qcom: sc7180: Annotate l13a on trogdor to always-on
    spi: spi-qcom-qspi: Support pinctrl sleep states
    dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
    input-enable
    dt-bindings: pinctrl: qcom: Add output-enable
    pinctrl: qcom: Support OUTPUT_ENABLE; deprecate INPUT_ENABLE
    arm64: dts: qcom: sc7180: Remove superfluous "input-enable"s from
    trogdor
    arm64: dts: qcom: sc7280: Remove superfluous "input-enable"s from
    idp-ec-h1
    arm64: dts: qcom: sdm845: Remove superfluous "input-enable"s from
    cheza
    arm64: dts: qcom: sc7180: Fix trogdor qspi pin config
    arm64: dts: qcom: sc7280: Fix qspi pin config
    arm64: dts: qcom: sdm845: Fix cheza qspi pin config

    .../bindings/pinctrl/qcom,tlmm-common.yaml | 4 +-
    arch/arm64/boot/dts/qcom/sc7180-idp.dts | 9 ++--
    arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 41 +++++++++++++------
    arch/arm64/boot/dts/qcom/sc7180.dtsi | 11 +++--
    .../boot/dts/qcom/sc7280-chrome-common.dtsi | 25 ++++++++++-
    .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++---
    .../arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi | 2 -
    arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 13 +++---
    arch/arm64/boot/dts/qcom/sc7280.dtsi | 11 +++--
    arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 37 ++++++++++++-----
    arch/arm64/boot/dts/qcom/sdm845.dtsi | 11 +++--
    drivers/pinctrl/qcom/pinctrl-msm.c | 36 +++++++++++++---
    drivers/spi/spi-qcom-qspi.c | 5 +++
    13 files changed, 165 insertions(+), 54 deletions(-)

    --
    2.40.0.348.gf938b09366-goog

    \
     
     \ /
      Last update: 2023-03-27 01:15    [W:4.096 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site