lkml.org 
[lkml]   [2023]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v12 5/5] media: i2c: imx334: update pixel and link frequency
Date
Hi Sakari,

> -----Original Message-----
> From: Sakari Ailus <sakari.ailus@iki.fi>
> Sent: 15 March 2023 12:35 AM
> To: shravan Chippa - I35088 <Shravan.Chippa@microchip.com>
> Cc: paul.j.murphy@intel.com; daniele.alessandrelli@intel.com;
> mchehab@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org;
> shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
> festevam@gmail.com; linux-imx@nxp.com; linux-media@vger.kernel.org; linux-
> kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v12 5/5] media: i2c: imx334: update pixel and link frequency
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hi Shravan,
>
> On Wed, Mar 01, 2023 at 01:04:12PM +0530, shravan kumar wrote:
> > @@ -885,7 +895,13 @@ static int imx334_init_pad_cfg(struct v4l2_subdev
> *sd,
> > struct v4l2_subdev_format fmt = { 0 };
> >
> > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY :
> V4L2_SUBDEV_FORMAT_ACTIVE;
> > - imx334_fill_pad_format(imx334, &supported_modes[0], &fmt);
> > + fmt->format.code = imx334->cur_code;
>
> This does not compile.
>
> > + imx334_fill_pad_format(imx334, imx334->cur_mode, &fmt);
> > +
> > + __v4l2_ctrl_modify_range(imx334->link_freq_ctrl, 0,
> > + __fls(imx334->menu_skip_mask),
> > + ~(imx334->menu_skip_mask),
> > + __ffs(imx334->menu_skip_mask));
>
> You're not holding imx334->mutex here, as you should. Also accessing
> imx334->cur_code should only be done while that mutex is acquired.
>
> What's the purpose of calling __v4l2_ctrl_modify_range() here, all these values
> are static once probe() function has been called, aren't they?

v4l2_ctrl_new_int_menu() function limiting only upper and lower frequencies max and min, as of now only two frequencies no problem. If we have more frequencies then we may need to use__v4l2_ctrl_modify_range() with skip mask value.

>
> I'm dropping this patch for now, taking the first four.

I will try to send it as a separate patch.
>
> >
> > return imx334_set_pad_format(sd, sd_state, &fmt); }
>
> --
> Kind regards,
>
> Sakari Ailus

\
 
 \ /
  Last update: 2023-03-27 01:11    [W:0.220 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site