lkml.org 
[lkml]   [2023]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 RFC] rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time
Date
Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> The VRTC alarm register can be programmed with an amount of seconds
> after which the SoC will be woken up by the VRTC timer again. We are
> already converting the alarm time from meson_vrtc_set_alarm() to
> "seconds since 1970". This means we also need to use "seconds since
> 1970" for the current time.
>
> This fixes a problem where setting the alarm to one minute in the future
> results in the firmware (which handles wakeup) to output (on the serial
> console) that the system will be woken up in billions of seconds.
> ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch
> to ktime_get_real_ts64() to fix the calculation of the alarm time and to
> make the SoC wake up at the specified date/time. Also the firmware
> (which manages suspend) now prints either 59 or 60 seconds until wakeup
> (depending on how long it takes for the system to enter suspend).
>
> Fixes: 6ef35398e827 ("rtc: Add Amlogic Virtual Wake RTC")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Reviewed-by: Kevin Hilman <khilman@baylibre.com>

\
 
 \ /
  Last update: 2023-03-27 01:10    [W:4.563 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site