lkml.org 
[lkml]   [2023]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v15 12/12] x86/smpboot: Allow parallel bringup for SEV-ES
From
On 3/16/23 17:21, Usama Arif wrote:
> From: David Woodhouse <dwmw@amazon.co.uk>
>
> Enable parallel bringup for SEV-ES guests. The APs can't actually
> execute the CPUID instruction directly during early startup, but they
> can make the GHCB call directly instead, just as the VC trap handler
> would do.
>
> Thanks to Sabin for talking me through the way this works.
>
> Suggested-by: Sabin Rapan <sabrapan@amazon.com>
> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
> Signed-off-by: Usama Arif <usama.arif@bytedance.com>

Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>

> ---
> arch/x86/coco/core.c | 5 ++++
> arch/x86/include/asm/coco.h | 1 +
> arch/x86/include/asm/sev-common.h | 3 +++
> arch/x86/include/asm/smp.h | 5 +++-
> arch/x86/kernel/head_64.S | 30 ++++++++++++++++++++++++
> arch/x86/kernel/smpboot.c | 39 ++++++++++++++++++++++++++-----
> 6 files changed, 76 insertions(+), 7 deletions(-)
>
> diff --git a/arch/x86/coco/core.c b/arch/x86/coco/core.c
> index 49b44f881484..0bab38efb15a 100644
> --- a/arch/x86/coco/core.c
> +++ b/arch/x86/coco/core.c
> @@ -129,6 +129,11 @@ u64 cc_mkdec(u64 val)
> }
> EXPORT_SYMBOL_GPL(cc_mkdec);
>
> +enum cc_vendor cc_get_vendor(void)
> +{
> + return vendor;
> +}
> +
> __init void cc_set_vendor(enum cc_vendor v)
> {
> vendor = v;
> diff --git a/arch/x86/include/asm/coco.h b/arch/x86/include/asm/coco.h
> index 3d98c3a60d34..0428d9712c96 100644
> --- a/arch/x86/include/asm/coco.h
> +++ b/arch/x86/include/asm/coco.h
> @@ -12,6 +12,7 @@ enum cc_vendor {
> };
>
> void cc_set_vendor(enum cc_vendor v);
> +enum cc_vendor cc_get_vendor(void);
> void cc_set_mask(u64 mask);
>
> #ifdef CONFIG_ARCH_HAS_CC_PLATFORM
> diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
> index b8357d6ecd47..f25df4bd318e 100644
> --- a/arch/x86/include/asm/sev-common.h
> +++ b/arch/x86/include/asm/sev-common.h
> @@ -70,6 +70,7 @@
> /* GHCBData[63:12] */ \
> (((u64)(v) & GENMASK_ULL(63, 12)) >> 12)
>
> +#ifndef __ASSEMBLY__
> /*
> * SNP Page State Change Operation
> *
> @@ -160,6 +161,8 @@ struct snp_psc_desc {
>
> #define GHCB_RESP_CODE(v) ((v) & GHCB_MSR_INFO_MASK)
>
> +#endif /* __ASSEMBLY__ */
> +
> /*
> * Error codes related to GHCB input that can be communicated back to the guest
> * by setting the lower 32-bits of the GHCB SW_EXITINFO1 field to 2.
> diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
> index defe76ee9e64..1584f04a7007 100644
> --- a/arch/x86/include/asm/smp.h
> +++ b/arch/x86/include/asm/smp.h
> @@ -204,7 +204,10 @@ extern unsigned int smpboot_control;
> /* Control bits for startup_64 */
> #define STARTUP_APICID_CPUID_0B 0x80000000
> #define STARTUP_APICID_CPUID_01 0x40000000
> +#define STARTUP_APICID_SEV_ES 0x20000000
>
> -#define STARTUP_PARALLEL_MASK (STARTUP_APICID_CPUID_01 | STARTUP_APICID_CPUID_0B)
> +#define STARTUP_PARALLEL_MASK (STARTUP_APICID_CPUID_01 | \
> + STARTUP_APICID_CPUID_0B | \
> + STARTUP_APICID_SEV_ES)
>
> #endif /* _ASM_X86_SMP_H */
> diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
> index 65bca47d84a1..79a17e705f4e 100644
> --- a/arch/x86/kernel/head_64.S
> +++ b/arch/x86/kernel/head_64.S
> @@ -26,6 +26,7 @@
> #include <asm/nospec-branch.h>
> #include <asm/fixmap.h>
> #include <asm/smp.h>
> +#include <asm/sev-common.h>
>
> /*
> * We are not able to switch in one step to the final KERNEL ADDRESS SPACE
> @@ -242,6 +243,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
> *
> * Bit 31 STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
> * Bit 30 STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
> + * Bit 29 STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
> * Bit 0-24 CPU# if STARTUP_APICID_CPUID_xx flags are not set
> */
> movl smpboot_control(%rip), %ecx
> @@ -249,6 +251,10 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
> jnz .Luse_cpuid_0b
> testl $STARTUP_APICID_CPUID_01, %ecx
> jnz .Luse_cpuid_01
> +#ifdef CONFIG_AMD_MEM_ENCRYPT
> + testl $STARTUP_APICID_SEV_ES, %ecx
> + jnz .Luse_sev_cpuid_0b
> +#endif
> andl $0x0FFFFFFF, %ecx
> jmp .Lsetup_cpu
>
> @@ -259,6 +265,30 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
> shr $24, %edx
> jmp .Lsetup_AP
>
> +#ifdef CONFIG_AMD_MEM_ENCRYPT
> +.Luse_sev_cpuid_0b:
> + /* Set the GHCB MSR to request CPUID 0xB_EDX */
> + movl $MSR_AMD64_SEV_ES_GHCB, %ecx
> + movl $(GHCB_CPUID_REQ_EDX << 30) | GHCB_MSR_CPUID_REQ, %eax
> + movl $0x0B, %edx
> + wrmsr
> +
> + /* Perform GHCB MSR protocol */
> + rep; vmmcall /* vmgexit */
> +
> + /*
> + * Get the result. After the RDMSR:
> + * EAX should be 0xc0000005
> + * EDX should have the CPUID register value and since EDX
> + * is the target register, no need to move the result.
> + */
> + rdmsr
> + andl $GHCB_MSR_INFO_MASK, %eax
> + cmpl $GHCB_MSR_CPUID_RESP, %eax
> + jne 1f
> + jmp .Lsetup_AP
> +#endif
> +
> .Luse_cpuid_0b:
> mov $0x0B, %eax
> xorl %ecx, %ecx
> diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
> index 0960fdec43c2..895395787afc 100644
> --- a/arch/x86/kernel/smpboot.c
> +++ b/arch/x86/kernel/smpboot.c
> @@ -85,6 +85,7 @@
> #include <asm/hw_irq.h>
> #include <asm/stackprotector.h>
> #include <asm/sev.h>
> +#include <asm/coco.h>
>
> /* representing HT siblings of each logical CPU */
> DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map);
> @@ -1513,15 +1514,36 @@ void __init smp_prepare_cpus_common(void)
> * We can do 64-bit AP bringup in parallel if the CPU reports its APIC
> * ID in CPUID (either leaf 0x0B if we need the full APIC ID in X2APIC
> * mode, or leaf 0x01 if 8 bits are sufficient). Otherwise it's too
> - * hard. And not for SEV-ES guests because they can't use CPUID that
> - * early.
> + * hard.
> */
> static bool prepare_parallel_bringup(void)
> {
> - if (IS_ENABLED(CONFIG_X86_32) || cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
> + bool has_sev_es = false;
> +
> + if (IS_ENABLED(CONFIG_X86_32))
> return false;
>
> - if (x2apic_mode) {
> + /*
> + * Encrypted guests other than SEV-ES (in the future) will need to
> + * implement an early way of finding the APIC ID, since they will
> + * presumably block direct CPUID too. Be kind to our future selves
> + * by warning here instead of just letting them break. Parallel
> + * startup doesn't have to be in the first round of enabling patches
> + * for any such technology.
> + */
> + if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
> + switch (cc_get_vendor()) {
> + case CC_VENDOR_AMD:
> + has_sev_es = true;
> + break;
> +
> + default:
> + pr_info("Disabling parallel bringup due to guest state encryption\n");
> + return false;
> + }
> + }
> +
> + if (x2apic_mode || has_sev_es) {
> if (boot_cpu_data.cpuid_level < 0x0b)
> return false;
>
> @@ -1530,8 +1552,13 @@ static bool prepare_parallel_bringup(void)
> return false;
> }
>
> - pr_debug("Using CPUID 0xb for parallel CPU startup\n");
> - smpboot_control = STARTUP_APICID_CPUID_0B;
> + if (has_sev_es) {
> + pr_debug("Using SEV-ES CPUID 0xb for parallel CPU startup\n");
> + smpboot_control = STARTUP_APICID_SEV_ES;
> + } else {
> + pr_debug("Using CPUID 0xb for parallel CPU startup\n");
> + smpboot_control = STARTUP_APICID_CPUID_0B;
> + }
> } else {
> /* Without X2APIC, what's in CPUID 0x01 should suffice. */
> if (boot_cpu_data.cpuid_level < 0x01)

\
 
 \ /
  Last update: 2023-03-27 01:05    [W:0.198 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site