lkml.org 
[lkml]   [2023]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: qcom: sm6115: Add geni debug uart node for qup0
On Wed, Feb 08, 2023 at 05:57:18PM +0530, Bhupesh Sharma wrote:
> qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
> Add the debug uart node in sm6115 dtsi file.

Is there anything special about SE4 that makes it *the* debug
UART or does it just happen to be the UART that is used by the
reference board? I suspect the latter, in which case the
"qcom,geni-debug-uart" string should be set/overwritten in the
board file as in sc7280-qcard.dtsi or sc8280xp-crd.dts.

> Cc: Bjorn Andersson <andersson@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> Changes since v1:
> - v1 can be viewed here: https://lore.kernel.org/linux-arm-msm/20221128171215.1768745-1-bhupesh.sharma@linaro.org/
> - Addressed Konrad's review comments on v1.
> - Rebased againt latest linux-next/master which now has the 'qupv3_id_0' node
> already in the dtsi file, so just add the debug uart node in v2.
>
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 50cb8a82ecd5..3eccfb8c16ce 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -963,6 +963,15 @@ spi4: spi@4a90000 {
> status = "disabled";
> };
>
> + uart4: serial@4a90000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0x04a90000 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> i2c5: i2c@4a94000 {
> compatible = "qcom,geni-i2c";
> reg = <0x04a94000 0x4000>;
> @@ -992,7 +1001,6 @@ spi5: spi@4a94000 {
> dma-names = "tx", "rx";
> #address-cells = <1>;
> #size-cells = <0>;
> - status = "disabled";
> };
> };
>
> --
> 2.38.1
>

\
 
 \ /
  Last update: 2023-03-27 00:16    [W:0.053 / U:3.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site