lkml.org 
[lkml]   [2023]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/11] ARM: debug: removal of STiH415/STiH416 related debug uart
Date
Remove the entries related to the debug uart addresses for
platforms STiH415 and STiH416 which are no more supported.

Signed-off-by: Alain Volmat <avolmat@me.com>
---
arch/arm/Kconfig.debug | 28 ----------------------------
1 file changed, 28 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c345775f035b..e7307eeb2abb 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1205,26 +1205,6 @@ choice
Say Y here if you want kernel low-level debugging support
on ST SPEAr13xx based platforms.

- config DEBUG_STIH41X_ASC2
- bool "Use StiH415/416 ASC2 UART for low-level debug"
- depends on ARCH_STI
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2000, which has
- default UART wired up to ASC2.
-
- If unsure, say N.
-
- config DEBUG_STIH41X_SBC_ASC1
- bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
- depends on ARCH_STI
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2020. which has
- default UART wired up to SBC ASC1.
-
- If unsure, say N.
-
config DEBUG_STIH418_SBC_ASC0
bool "Use StiH418 SBC ASC0 UART for low-level debug"
depends on ARCH_STI
@@ -1597,8 +1577,6 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
- default "debug/sti.S" if DEBUG_STIH41X_ASC2
- default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
default "debug/stm32.S" if DEBUG_STM32_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
@@ -1728,9 +1706,7 @@ config DEBUG_UART_PHYS
default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfd883000 if DEBUG_ALPINE_UART0
- default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
default 0xfe800000 if ARCH_IOP32X
- default 0xfed32000 if DEBUG_STIH41X_ASC2
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART0
default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
@@ -1759,7 +1735,6 @@ config DEBUG_UART_PHYS
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART || DEBUG_STM32_UART || \
- DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
DEBUG_STIH418_SBC_ASC0

config DEBUG_UART_VIRT
@@ -1827,9 +1802,7 @@ config DEBUG_UART_VIRT
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
- default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
default 0xfd883000 if DEBUG_ALPINE_UART0
- default 0xfdd32000 if DEBUG_STIH41X_ASC2
default 0xfe010000 if STM32MP1_DEBUG_UART
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
@@ -1871,7 +1844,6 @@ config DEBUG_UART_VIRT
DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_DIGICOLOR_UA0 || \
DEBUG_AT91_UART || DEBUG_STM32_UART || \
- DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
DEBUG_STIH418_SBC_ASC0

config DEBUG_UART_8250_SHIFT
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:16    [W:0.185 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site