lkml.org 
[lkml]   [2023]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 7/7] arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node
Date
Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

The v4 is here:
https://lore.kernel.org/all/20230207135551.1418637-8-abel.vesa@linaro.org/

Changes since v4:
* none

Changes since v3:
* Dropped the phy-names property from usb_1_hsphy, like Dmitry suggested

arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 56aab7cafcbc..6b6ec0fe5e5e 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -457,6 +457,11 @@ sdc2_card_det_n: sdc2-card-det-state {
};
};

+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -563,6 +568,8 @@ &usb_1_hsphy {
vdd-supply = <&vreg_l1e_0p88>;
vdda12-supply = <&vreg_l3e_1p2>;

+ phys = <&pm8550b_eusb2_repeater>;
+
status = "okay";
};

--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:15    [W:0.070 / U:1.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site