lkml.org 
[lkml]   [2023]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/3] mtd: rawnand: sunxi: Update OOB layout to match hardware
Date
On Sat, 2023-02-04 at 14:35:18 UTC, Samuel Holland wrote:
> When using the hardware ECC engine, the OOB data is made available in
> the NFC_REG_USER_DATA registers, as one 32-bit word per ECC step. Any
> additional bytes are only accessible through raw reads and software
> descrambling. For efficiency, and to match the vendor driver, ignore
> these extra bytes when using hardware ECC.
>
> Note that until commit 34569d869532 ("mtd: rawnand: sunxi: Fix the size
> of the last OOB region"), this extra free area was reported with length
> zero, so this is not a functional change for any stable kernel user.
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

\
 
 \ /
  Last update: 2023-03-27 00:10    [W:0.053 / U:1.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site