lkml.org 
[lkml]   [2023]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] HID: i2c-hid: goodix: Add mainboard-vddio-supply
Date
As talked about in the patch ("dt-bindings: HID: i2c-hid: goodix: Add
mainboard-vddio-supply") we may need to power up a 1.8V rail on the
host associated with touchscreen IO. Let's add support in the driver
for it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
Unfortunately, I haven't been able to actually test this on real
hardware yet. However, the change is very simple, I believe it is
correct, and it doesn't break other boards I've tested it on.

drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 584d833dc0aa..0060e3dcd775 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -26,6 +26,7 @@ struct i2c_hid_of_goodix {
struct i2chid_ops ops;

struct regulator *vdd;
+ struct regulator *vddio;
struct gpio_desc *reset_gpio;
const struct goodix_i2c_hid_timing_data *timings;
};
@@ -40,6 +41,10 @@ static int goodix_i2c_hid_power_up(struct i2chid_ops *ops)
if (ret)
return ret;

+ ret = regulator_enable(ihid_goodix->vddio);
+ if (ret)
+ return ret;
+
if (ihid_goodix->timings->post_power_delay_ms)
msleep(ihid_goodix->timings->post_power_delay_ms);

@@ -56,6 +61,7 @@ static void goodix_i2c_hid_power_down(struct i2chid_ops *ops)
container_of(ops, struct i2c_hid_of_goodix, ops);

gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+ regulator_disable(ihid_goodix->vddio);
regulator_disable(ihid_goodix->vdd);
}

@@ -81,6 +87,10 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client)
if (IS_ERR(ihid_goodix->vdd))
return PTR_ERR(ihid_goodix->vdd);

+ ihid_goodix->vddio = devm_regulator_get(&client->dev, "mainboard-vddio");
+ if (IS_ERR(ihid_goodix->vddio))
+ return PTR_ERR(ihid_goodix->vddio);
+
ihid_goodix->timings = device_get_match_data(&client->dev);

return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
--
2.39.1.519.gcb327c4b5f-goog
\
 
 \ /
  Last update: 2023-03-27 00:12    [W:0.118 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site