lkml.org 
[lkml]   [2023]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC v3 3/7] dt-bindings: phy: qcom,snps-eusb2-repeater: Add phy related properties
From
On 02/02/2023 15:38, Abel Vesa wrote:
> The phy properties are used for allowing the eusb2 to interface
> with the repeater, which is modelled as a phy driver. Add the phys
> and phy-names properties.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> .../devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> index de72577e34a4..8efb09b2dc5c 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> @@ -33,6 +33,15 @@ properties:
> resets:
> maxItems: 1
>
> + phys:
> + maxItems: 1
> + description:
> + Phandle to eUSB2 to USB 2.0 repeater
> +
> + phy-names:
> + items:
> + - const: eusb2-repeater
> +

Do we really need the phy-names? There is a single PHY.

--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-03-27 00:09    [W:0.091 / U:2.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site