lkml.org 
[lkml]   [2023]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v5 4/8] ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
Date
On 03.02.2023 05:48, Durai Manickam KR wrote:
> From: Manikandan Muralidharan <manikandan.m@microchip.com>
>
> The UART submodule in Flexcom has 16-byte Transmit and Receive FIFOs.
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
> Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> ---
> arch/arm/boot/dts/sam9x60.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
> index ee6cc4329ae4..1e401a919f56 100644
> --- a/arch/arm/boot/dts/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/sam9x60.dtsi
> @@ -209,6 +209,7 @@ AT91_XDMAC_DT_PER_IF(1) |
> clock-names = "usart";
> atmel,use-dma-rx;
> atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> status = "disabled";
> };
> };

\
 
 \ /
  Last update: 2023-03-27 00:08    [W:0.106 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site