lkml.org 
[lkml]   [2023]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v3 4/4] net: phy: c45: genphy_c45_ethtool_set_eee: validate EEE link modes
Date
Currently, it is possible to let some PHYs to advertise not supported
EEE link modes. So, validate them before overwriting existing
configuration.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/phy-c45.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 8717c122e2f3..3813b86689d0 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -1438,12 +1438,23 @@ int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
int ret;

if (data->eee_enabled) {
- if (data->advertised)
+ if (data->advertised) {
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(adv);
+
+ ethtool_convert_legacy_u32_to_link_mode(adv,
+ data->advertised);
+ linkmode_andnot(adv, adv, phydev->supported_eee);
+ if (!linkmode_empty(adv)) {
+ phydev_warn(phydev, "At least some EEE link modes are not supported.\n");
+ return -EINVAL;
+ }
+
ethtool_convert_legacy_u32_to_link_mode(phydev->advertising_eee,
data->advertised);
- else
+ } else {
linkmode_copy(phydev->advertising_eee,
phydev->supported_eee);
+ }

phydev->eee_enabled = true;
} else {
--
2.30.2
\
 
 \ /
  Last update: 2023-03-27 00:32    [W:0.055 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site