lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v9 0/8] Parallel CPU bringup for x86_64
From
Date
On Tue, 2023-02-21 at 13:14 +0100, Oleksandr Natalenko wrote:
>
> With this in place:
>
> ```
>         early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(0);
>         initial_gs = per_cpu_offset(0);
>         smpboot_control = 0;
> ```
>
> the resume does not work.

Yeah, I think it's always running on CPU0 after the other CPUs are
taken down anyway.

We definitely *do* need to clear smpboot_control because we absolutely
want it using the temp_stack we explicitly put into initial_stack, not
finding its own idle thread.

The problem was that it was never being restored to STARTUP_SECONDARY
in the parallel modes, because that's a one-time setup in
native_smp_prepare_cpus(). So we can just restore it in
arch_thaw_secondary_cpus_begin() too, by working this into patch 6 of
the series.

(Usama, I think my tree is fairly out of date now so I'll let you do
that? Thanks!).

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 50621793671d..3db77a257ae2 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1571,6 +1571,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)

void arch_thaw_secondary_cpus_begin(void)
{
+ /*
+ * On suspend, smpboot_control will have been zeroed to allow the
+ * boot CPU to use explicitly passed values including a temporary
+ * stack. Since native_smp_prepare_cpus() won't be called again,
+ * restore the appropriate value for the parallel startup modes.
+ */
+ if (do_parallel_bringup) {
+ smpboot_control = STARTUP_SECONDARY |
+ (x2apic_mode ? STARTUP_APICID_CPUID_0B : STARTUP_APICID_CPUID_01);
+ }
+
set_cache_aps_delayed_init(true);
}

[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2023-03-27 00:30    [W:0.109 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site