lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 09/16] thermal: Do not access 'type' field, use the tz id instead
Date
The 'type' field is used as a name in the message. However we can have
multiple thermal zone with the same type. The information is not
accurate.

Moreover, the thermal zone device structure is directly accessed while
we want to improve the self-encapsulation of the code.

Replace the 'type' in the message by the thermal zone id.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
---
drivers/acpi/thermal.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 4 ++--
drivers/thermal/mediatek/lvts_thermal.c | 5 +----
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 4 ++--
4 files changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 392b73b3e269..b55a3b0ad9ed 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -842,7 +842,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
goto acpi_bus_detach;

dev_info(&tz->device->dev, "registered as thermal_zone%d\n",
- tz->thermal_zone->id);
+ thermal_zone_device_get_id(tz->thermal_zone));

return 0;

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index 722e4a40afef..a997fca211ba 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -176,8 +176,8 @@ mlxsw_thermal_module_trips_update(struct device *dev, struct mlxsw_core *core,
}

if (crit_temp > emerg_temp) {
- dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n",
- tz->tzdev->type, crit_temp, emerg_temp);
+ dev_warn(dev, "tz id %d: Critical threshold %d is above emergency threshold %d\n",
+ thermal_zone_device_get_id(tz->tzdev), crit_temp, emerg_temp);
return 0;
}

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index beb835d644e2..155cef8ed3f5 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -304,10 +304,8 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
*
* 14-0 : Raw temperature for threshold
*/
- if (low != -INT_MAX) {
- pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low);
+ if (low != -INT_MAX)
writel(raw_low, LVTS_H2NTHRE(base));
- }

/*
* Hot temperature threshold
@@ -318,7 +316,6 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
*
* 14-0 : Raw temperature for threshold
*/
- pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high);
writel(raw_high, LVTS_HTHRE(base));

return 0;
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 060f46cea5ff..488b08fc20e4 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -43,8 +43,8 @@ static void ti_thermal_work(struct work_struct *work)

thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);

- dev_dbg(data->bgp->dev, "updated thermal zone %s\n",
- data->ti_thermal->type);
+ dev_dbg(data->bgp->dev, "updated thermal zone id %d\n",
+ thermal_zone_device_get_id(data->ti_thermal));
}

/**
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:30    [W:0.860 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site